首页 > 资源导航 > 标准 > 医药、卫生、劳动保护 > 血液
标准分类
发布日期
全部
订阅
收起
标准
  • ISO 16603-2004 - 中外标准 - - 2004/4 - 现行
    ISO 16603:2004 describes a laboratory test method for measuring the penetration resistance of clothing materials to blood and body fluids. This test method uses a synthetic blood in continuous contact with the material specimen at specified set of conditions using the ISO 13994 test apparatus. This test method is not always effective in testing protective clothing materials having thick, inner liners which readily absorb the synthetic blood.
    试验定义体液实验室试验渗透性试验血液液体安全防护服装BloodBody fluidsDefinitionsLaboratory testingLiquidsPenetration testsProtective clothingSafetyTesting
  • ISO 16604-2004 - 中外标准 - - 2004/4 - 现行
    ISO 16604:2004 describes a laboratory test method for measuring the resistance of materials used in protective clothing to penetration by blood-borne pathogens. This test method uses a surrogate microbe under conditions of continuous liquid contact. Protective clothing "pass/fail" determinations are based on the detection of viral penetration at a specific hydrostatic pressure using the ISO 13994 test apparatus. This test method is not always effective in testing protective clothing materials having thick, inner liners which readily absorbs the challenge fluid. This test method involves a sensitive assay procedure. Because of the length of time required to complete this test method, it might not be suitable for use as a material or protective clothing quality control or assurance procedure.
    实验室试验试验安全定义微生物防护服装细菌纲液体血液体液病原细菌渗透性试验BacteriaBloodBody fluidsDefinitionsGermsLaboratory testingLiquidsMicroorganismsPathogenic bacteriaPenetration testsProtective clothingSafetyTesting
  • ISO 22609-2004 - 中外标准 - - 2004/12 - 现行
    ISO 22609:2004 describes a laboratory test method for measuring the resistance of medical face masks to penetration by a splash of synthetic blood. ISO 22609:2004 primarily addresses the performance of materials or certain material constructions used in medical face masks. The test method does not address the performance of the medical face mask''s design, construction, interfaces or other factors which may affect the overall protection offered by the medical face mask and its operation (such as filtration efficiency and pressure drop). ISO 22609:2004 does not evaluate the performance of medical face masks as a protection against contamination via airborne exposure pathways or in the prevention of the penetration of aerosolized body fluids deposited on the medical face mask.
    血液防护服环境清洁材料规范工装裤性能要求感染传染危险性人员规范(验收)传染病试验定义保健污染保护措施工作罩衣职业安全面具(防护工作服)医疗设备工作场所安全液体安全工程作标记耐力职业医学密封性卫生学防护服装材料强度安全措施BloodContaminationDanger of infectionDefinitionsEnvironmental cleanlinessHealth protectionHygieneInfectionInfectious diseasesLiquidsMarkingMasks (protective clothing)Materials specificationMedical equipmentMedical personnelOccupational medicineOccupational safetyOverallsPathogenic bacteriaPerformance requirementsPersonnelProtective clothingProtective measuresProtective suitsResistanceSafety engineeringSafety measuresSpecification (approval)Strength of materialsTestingTightnessWorkplace safety
  • BS ISO 16603-2004 - 中外标准 - - - 现行
    This International Standard describes a laboratory test method for measuring the penetration resistance of clothing materials to blood and body fluids. This test method uses a synthetic blood in continuous contact with the material specimen at specified set of conditions using the ISO 13994 test apparatus. This test method is not always effective in testing protective clothing materials having thick, inner liners which readily absorb the synthetic blood.
    Protective clothingBloodBody fluidsPermeability measurementPenetration testsWater-resistance testsBiological analysis and testingOccupational safetyHealth service personnelHospital equipmentClothingBloodBody fluidsDefinitionDefinitionsLaboratory testingLiquidsPenetration testsProtective clothingSafetyTesting
  • ASTM F1671-2007 - 中外标准 - - - 现行
    <p>1.1 This test method is used to measure the resistance of materials used in protective clothing to penetration by blood-borne pathogens using a surrogate microbe under conditions of continuous liquid contact. Protective clothing material <i>pass/fail </i> determinations are based on the detection of viral penetration. </p><p>1.1.1 This test method is not always effective in testing protective clothing materials having thick, inner liners which readily absorb the liquid assay fluid.</p><p>1.2 This test method does not apply to all forms or conditions of blood-borne pathogen exposure. Users of the test method should review modes for worker/clothing exposure and assess the appropriateness of this test method for their specific applications.</p><p>1.3 This test method has been specifically defined for modeling the viral penetration of Hepatitis (B and C) and Human Immunodeficiency Viruses transmitted in blood and other potentially infectious body fluids. Inferences for protection from other pathogens must be assessed on a case-by-case basis.</p><p>1.4 This test method addresses only the performance of materials or certain material constructions (for example, seams) used in protective clothing and determined to be viral resistant. This test method does not address the design, overall construction and components, or interfaces of garments or other factors which may affect the overall protection offered by the protective clothing.</p><p>1.5 The values stated in SI units or in other units shall be regarded separately as standard. The values stated in each system must be used independently of the other, without combining values in any way.</p><p>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. </p>
    血液体液衣服材料材料试验医疗人员抗渗透防护服装防护设备耐力试验bloodblood-borne pathogensbody fluidsPhi-X174 Bacteriophageprotective clothingviral penetration
  • JIS T8061-2010 - 中外标准 - - - 现行
    This Standard describes a laboratory test method for measuring the resistance of materials used in protective clothing to penetration by blood-borne pathogens.
  • BS ISO 16604-2004 - 中外标准 - - - 现行
    This International Standard describes a laboratory test method for measuring the resistance of materials used in protective clothing to penetration by blood-borne pathogens. This test method uses a surrogate microbe under conditions of continuous liquid contact. Protective clothing "pass/fail" determinations are based on the detection of viral penetration at a specific hydrostatic pressure using the ISO 13994 test apparatus. This test method is not always effective in testing protective clothing materials having thick, inner liners which readily absorb the challenge fluid. This test method involves a sensitive assay procedure. Because of the length of time required to complete this test method, it might not be suitable for use as a material or protective clothing quality control or assurance procedure.
    定义安全试验实验室试验防护服装细菌纲病原细菌液体微生物体液血液渗透性试验BacteriaBloodBody fluidsDefinitionDefinitionsGermsLaboratory testingLiquidsMicroorganismsPathogenic bacteriaPenetration testsProtective clothingSafetyTesting
  • ASTM F1671-2003 - 中外标准 - - - 作废
  • ASTM F1819-2007 - 中外标准 - - - 现行
    <p>1.1 This test method is used to evaluate the resistance of materials used in protective clothing to synthetic blood under the conditions of liquid contact and increasing direct mechanical pressure. The penetration resistance of protective clothing is based on visual detection of synthetic blood penetration at a specific applied mechanical pressure.</p><p>1.2 This test method does not apply to all forms or conditions of blood-borne pathogen exposure. Users of the test method must review modes for work/clothing exposure and assess the appropriateness of this test method for their specific application.</p><p>1.3 This test method addresses only the performance of materials or certain material constructions (for example, seams) used in protective clothing. This test method does not address the design, overall construction, components, or interfaces of garments, or other factors which may affect the overall protection offered by the protective clothing.</p><p>1.4 The values in SI units or in other units shall be regarded separately as standard. The values stated in each system must be used independently of the other, without combining values in any way.</p><p>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.</p>
    血液体液液体渗透性渗透性试验防护服装试验方法bloodblood-borne pathogensbody fluidsmechanical pressurepenetrationprotective clothingsynthetic blood
  • JIS T8060-2007 - 中外标准 - - - 现行
    この規格は,血液及び体液に対する防護服材料の耐浸透性を求めるための試験方法について規定する。
回到顶部
选择了条数据