首页 > 资源导航 > 标准 > 医药、卫生、劳动保护 > 血液
标准分类
发布日期
全部
订阅
收起
标准
  • ISO 8638-2004 - 中外标准 - - 2004/10 - 作废
    ISO 8638:2004 specifies requirements for single-use extracorporeal blood circuits (hereafter referred to as "the device") and (integral and non-integral) transducer protectors which are intended for use in haemodialysis, haemodiafiltration and haemofiltration. ISO 8638:2004 is not applicable to haemodialysers, haemodiafilters or haemofilters, plasmafilters, haemoperfusion devices, vascular access devices, blood pumps, pressure monitors for the extracorporeal blood circuit, air detection devices, systems to prepare, maintain or monitor dialysing fluid, or systems intended to perform haemofiltration or haemoconcentration. Requirements for haemodialysers, haemodiafilters, haemofilters and haemoconcentrators are specified in ISO 8637.
  • ISO 8637-2004 - 中外标准 - - 2004/10 - 作废
    ISO 8637:2004 specifies requirements for haemodialysers, haemodiafilters, haemofilters and haemoconcentrators, hereinafter collectively referred to as ''the device'', for use for humans. ISO 8637:2004 is not applicable to extracorporeal blood circuits, plasmafilters, haemoperfusion devices, vascular access devices, blood pumps, pressure monitors for the extracorporeal blood circuit, air detection devices, systems to prepare, maintain or monitor dialysate, systems used to perform haemofiltration or haemoconcentration, reprocessing procedures and equipment. Requirements for the extracorporeal blood circuit for haemodialysers, haemodiafilters, and haemofilters are specified in ISO 8638.
  • ISO 16603-2004 - 中外标准 - - 2004/4 - 现行
    ISO 16603:2004 describes a laboratory test method for measuring the penetration resistance of clothing materials to blood and body fluids. This test method uses a synthetic blood in continuous contact with the material specimen at specified set of conditions using the ISO 13994 test apparatus. This test method is not always effective in testing protective clothing materials having thick, inner liners which readily absorb the synthetic blood.
    试验定义体液实验室试验渗透性试验血液液体安全防护服装BloodBody fluidsDefinitionsLaboratory testingLiquidsPenetration testsProtective clothingSafetyTesting
  • 服务由 质检出版社 提供

    GB 14232.1-2004 - 中外标准 - - 2004/8 - 现行
    GBl4232的本部分规定了密闭、无菌塑料血袋的要求(包括性能要求)。该血袋可带有采血管、输血插口、采血针和转移管,用于血液血液成分的采集、贮存、处理、转移、分离和输注。根据使用要求, 血袋可装入抗凝剂和(或)保养液。   GBl4232的本部分还适用于多连塑料血袋,如双连、三连或多连血袋。   除非另有规定,GBl4232的本部分规定的所有试验适用于将供使用的塑料血袋。   GBl4232的本部分不适用于与滤器连为一体的塑料血袋。
    容器塑料血液bloodhaematologyplasticbagspeoplecontainershumansplasticssacks
  • ISO 16604-2004 - 中外标准 - - 2004/4 - 现行
    ISO 16604:2004 describes a laboratory test method for measuring the resistance of materials used in protective clothing to penetration by blood-borne pathogens. This test method uses a surrogate microbe under conditions of continuous liquid contact. Protective clothing "pass/fail" determinations are based on the detection of viral penetration at a specific hydrostatic pressure using the ISO 13994 test apparatus. This test method is not always effective in testing protective clothing materials having thick, inner liners which readily absorbs the challenge fluid. This test method involves a sensitive assay procedure. Because of the length of time required to complete this test method, it might not be suitable for use as a material or protective clothing quality control or assurance procedure.
    实验室试验试验安全定义微生物防护服装细菌纲液体血液体液病原细菌渗透性试验BacteriaBloodBody fluidsDefinitionsGermsLaboratory testingLiquidsMicroorganismsPathogenic bacteriaPenetration testsProtective clothingSafetyTesting
  • CNS 14393-4-2004 - 中外标准 - - 2004/4 - 现行
  • CNS 14800-2004 - 中外标准 - - 2004/1 - 现行
  • CNS 14799-2004 - 中外标准 - - 2004/1 - 现行
  • ISO 22609-2004 - 中外标准 - - 2004/12 - 现行
    ISO 22609:2004 describes a laboratory test method for measuring the resistance of medical face masks to penetration by a splash of synthetic blood. ISO 22609:2004 primarily addresses the performance of materials or certain material constructions used in medical face masks. The test method does not address the performance of the medical face mask''s design, construction, interfaces or other factors which may affect the overall protection offered by the medical face mask and its operation (such as filtration efficiency and pressure drop). ISO 22609:2004 does not evaluate the performance of medical face masks as a protection against contamination via airborne exposure pathways or in the prevention of the penetration of aerosolized body fluids deposited on the medical face mask.
    血液防护服环境清洁材料规范工装裤性能要求感染传染危险性人员规范(验收)传染病试验定义保健污染保护措施工作罩衣职业安全面具(防护工作服)医疗设备工作场所安全液体安全工程作标记耐力职业医学密封性卫生学防护服装材料强度安全措施BloodContaminationDanger of infectionDefinitionsEnvironmental cleanlinessHealth protectionHygieneInfectionInfectious diseasesLiquidsMarkingMasks (protective clothing)Materials specificationMedical equipmentMedical personnelOccupational medicineOccupational safetyOverallsPathogenic bacteriaPerformance requirementsPersonnelProtective clothingProtective measuresProtective suitsResistanceSafety engineeringSafety measuresSpecification (approval)Strength of materialsTestingTightnessWorkplace safety
  • 服务由 质检出版社 提供

    YY/T 0032-2004 - 中外标准 - - 2004/11 - 现行
    本标准规定了血红蛋白计的技术要求、试验方法、检验规则、标志、标签、使用说明书、包装、运输和贮存。 本标准适用于分光光度法测定血液中血红蛋白含量的血红蛋白计。 本标准不使用与沙利氏血红蛋白计。
    医用设备血红蛋白计
回到顶部
选择了条数据