IEC 61330-1995 - 中外标准 - - 1995/12 - 作废
Specifies the service conditions, rated characteristics, general structural requirements and test method of prefabricated substations, which are cable connected, for alternating current of primary rated voltages above 1 kV and up to and including 52 kV1, and for a transformer of maximum power 1 600 kVA, for service frequencies up to and including 60 Hz.
IEC 61243-2-1995 - 中外标准 - - 1995/10 - 现行
Is applicable to portable voltage detectors with or without a built-in power source to be used on electrical systems for voltages of 1 kV to 36 kV a.c., and frequencies from 15 Hz to 60 Hz. This part applies only to resistive voltage detectors used in contact with the part to be tested, as a single unit or as a separate device completed by an adaptable insulating pole covered in IEC 60855 or IEC 61235. Other types of voltage detectors are not covered by this part of standard.Capacitive voltage detectros are covered in IEC 61243-1.
电压电阻率带电作业事故预防额定电压装置电压表电气安全电气工程Accident preventionAlternating voltagesDefinitionsDesignElectric contact protectionElectric power networksElectrical engineeringElectrical equipmentElectrical safetyElectrical testingHand toolsInstallations for rated voltagesInstrumentsLive workingOccupational safetyPortableProtection against accidentsProtection against electric shocksProtection devicesResistivitySafety requirementsSpecification (approval)TestingVoltageVoltage testersVoltmeters
DL/T 5042-1995 - 中外标准 - - 1995/7 - 作废
IEC TR 61597-1995 - 中外标准 - - 1995/5 - 现行
Provides informations with regards to conductors specified in IEC 61089. Such informations include properties of conductors and useful methods of calculations. It does not discuss all theories and available methods for calculating conductor properties, but provides users with simple methods that provide acceptable accuracies. This publication has the status of a Technical Report - type 3.
GB/T 15544-1995 - 中外标准 - - 1995/4 - 作废
本标准适用于标称电压380V～220kV，频率50Hz的三相交流系统的短路电流计算。 本标准不适用于受控条件(短路试验站)下人为短路和飞机、船舶用电气设备的短路计算。 本标准主要作为进出口设备及对外工程投标使用，在国内工程计算中逐步推广采用。