军事知识服务平台
首页 > 资源导航 > 标准 > 化工 > 合成材料
标准分类
发布日期
全部
订阅
收起
标准
  • ISO 3383-1985 - 中外标准 - - 1985/12 - 作废
    Specifies general principles of the construction and operation of temperature-controlled chambers for conditioning and/or testing. The purpose of conditioning procedures is to ensure that the test piece is substantially at a uniform temperature throughout its mass and in equilibrium with its environment. An annex contains three tables for the condition times for rubber pieces shaping cylinders, flat sheets or flat strips.
  • ISO 2006-1985 - 中外标准 - - 1985/12 - 作废
    Specifies a stirring disk which has a greater diameter than that specified in ISO 35. The test is applicable for two viscosities of latices which are given in detail. The duration of stirring shall be agreed between the interested parties and shall not be longer than 30 min or less than 1 min. In case of a latex which contains ammonia the curation of stirring shall be limited. A formula for the expression of the results is given. Replaces the first edition (ISO 2006-1974) by a minor revision.
  • ISO 6453-1985 - 中外标准 - - 1985/12 - 现行
    Related to two types of sheetings: open cell material and closed cell material. They are graded according to hardness index. For type 1 sheeting a single hardness level is specified, but for type 2 sheeting a range. For sheeting up to approximately 100 mm the material indentation hardness index is specified. For type 2, mostly available in thicknesses much less than 50 mm, it is necessary to use a test piece consisting of a number of plies, therefore the product indentation hardness index is specified. An annex about organic materials staining.
    软微孔材料薄板材泡沫橡胶高聚物试验规范塑料聚氯乙烯foamed rubberpolymerspolyvinyl chlorideplasticssheetsspecificationsteststestingflexible cellular materials
  • ZB G33001-1985 - 中外标准 - - 1985/11 - 作废
  • ZB G33004-1985 - 中外标准 - - 1985/11 - 作废
  • CNS 11416-1985 - 中外标准 - - 1985/11 - 现行
    聚酰胺板材棒材尺寸公差尺寸
  • CNS 11415-1985 - 中外标准 - - 1985/11 - 现行
    聚四氟乙烯尺寸公差加工公差切削机械公差
  • GB 5576-1985 - 中外标准 - - 1985/10 - 作废
    合成橡胶术语
  • 服务由 质检出版社 提供

    GB/T 5474-1985 - 中外标准 - - 1985/10 - 作废
    本标准规定了以比色法半定量测定酚醛模塑制品中氨的含量。  注:本国家标准不适于氨的绝对量的测定。当必需考虑由于与模塑制品接触而引起金属嵌件的腐蚀或食品污染时,模塑制品氨的含量尤为重要。
    塑料酚醛树脂比色法铵无机化合物离子模塑材料含量测定酚醛树脂模塑材料离子铵无机化合物含量测定比色法塑料
  • 服务由 质检出版社 提供

    GB/T 5472-1985 - 中外标准 - - 1985/10 - 作废
    本标准适用于流动长度变化范围较大的热固性模塑料流动固化性的测定。本方法可用于控制模塑料的模塑性能稳定性的检验。
    热固性聚合物模塑材料稳定性流动性能试验检验塑料
回到顶部
选择了条数据