军事知识服务平台
首页 > 资源导航 > 标准 > 化工 > 合成材料
标准分类
全部
订阅
收起
标准
  • 服务由 质检出版社 提供

    GB/T 14833-1993 - 中外标准 - - 1993/12 - 作废
    本标准规定了塑胶跑道的技术要求、试验方法、检验规则、使用和维修。  本标准适用于以聚氨酯为主要材料的混合型弹性体铺设的体育场、馆跑道。
    塑料塑胶跑道运动设施田径器材塑料运动设施田径器材塑胶跑道
  • DL 519-1993 - 中外标准 - - 1993/12 - 作废
    火力发电厂发电厂水处理离子交换树脂树脂验收标准
  • ISO 10366-1-1993 - 中外标准 - - 1993/12 - 作废
    The types of MABS plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties Vicat softening temperature, melt flow rate, impact strength, flexural modulus and on information about basic polymer parameters, intended application and/or method of processing, important properties, additives, colorants, fillers and reinforcing materials. Is applicable to materials ready for normal use in the form of powder, granules or pellets and to materials unmodified or modified by colorants, additives, fillers, etc.
  • ISO 8986-1-1993 - 中外标准 - - 1993/12 - 作废
    The types of polybutene plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties density and melt flow rate and on information about basic polymer parameters, intended application and/or method of processing, important properties, additives, colorants, fillers and reinforcing materials. Is applicable to materials ready for normal use in the form of powder, granules or pellets and to materials unmodified or modified by colorants, additives, fillers, etc.
  • ISO 1872-1-1993 - 中外标准 - - 1993/12 - 作废
    The types of polyethylene plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties density and melt flow rate and on information about the intended application and/or method of processing, important properties, additives, colorants, fillers and reinforcing materials. Is applicable to materials ready for normal use in the form of powder, granules or pellets and to materials unmodified or modified by colorants, additives, fillers, etc.
    名称与符号挤压成型喷射铸造法塑料塑料模制材料聚乙烯模制材料Classification systemsCopolymersDefinitionsDensityDesignation systemsDesignationsEncodingExtrusionInjection mouldingMarkingMoulding materialsMouldings (shaped section)PEPlasticsPlastics moulding materialPolyethyleneProductionPropertiesSpecificationSpecimen preparationTest specimensTestingThermoplastic polymers
  • ISO 11409-1993 - 中外标准 - - 1993/12 - 现行
    The principle of the method specified is measuring the heat flux supplied to a test sample as a function of time or temperature, while the test sample is subjected to a temperature schedule under a specified atmosphere. A reaction is marked by the release of energy from the sample, resulting in an exothermic peak in the heating curve. Integration of the recorded peak area as a function of time gives a measure of the energy of the reaction. Applies to phenolic resins with exothermic behaviour, such as resols or mixtures of novolaks with hexamethylenetetramine or other curing agents.
    热分析温度熔融温度熔化反应热酚醛树脂试样制备定义热量测量塑料试验材料试验涂料化学反应差别法测量Chemical reactionsDefinitionsDifferential methodHeat measurementHeat of reactionMaterials testingMeasurementMelt temperatureMeltingPaintsPhenolic resinsPlasticsSpecimen preparationTemperatureTestingThermal analysis
  • ISO/TR 10501-1993 - 中外标准 - - 1993/12 - 现行
    Gives a method of calculating head loss in the transport of liquids under pressure in hydraulically smooth thermoplastic pipes. The formulae given (for calculating head drop and head loss, for temperature correction) apply to the transport of water under pressure, or to all other liquids of the same dynamic viscosity, at temperatures of up to 45 °C.
    塑料塑料管热塑性聚合物压力降压力试验数学计算材料规范压头损失测定DeterminationHead lossesMaterials specificationMathematical calculationsPipesPlastic pipesPlastic tubesPlasticsPressure dropsPressure testsThermoplastic polymers
  • ISO 11401-1993 - 中外标准 - - 1993/12 - 现行
    Specifies three chromatographic methods for the separation of phenolic resins into their component compounds according to molecular size or molecular weight and polarity: gel-permeation chromatography, high-performance liquid chromatography on polar and on non-polar columns. Applies to phenolic resins that are soluble in the solvents and solvent blends used. This test is useful for characterization of products and for research.
    液相色谱法材料试验涂料化学分析和试验试验分离工艺塑料定义含量测定酚醛树脂色谱法Chemical analysis and testingChromatographyDefinitionsDetermination of contentLiquid chromatographyMaterials testingPaintsPhenolic resinsPlasticsSeparation processesTesting
  • ISO 11248-1993 - 中外标准 - - 1993/11 - 现行
    Specifies a method for the determination of the mechanical, electrical, thermal and other properties of thermosetting moulding materials when tested under defined conditions at elevated temperatures. The method is used for the determination of the relative performance temperature (RPT). Coupled with the long-term property evaluations of polymeric materials, the RPT provides designers and engineers with a more complete picture of the expected performance of materials in use at elevated temperatures.
    塑料材料特性试验模制材料树脂模塑材料性能试验热阻热固高温试验使用热塑性的ApplicationsHeat resistanceHigh-temperature testingMaterialsMoulding materialsMouldings (shaped section)Performance testingPerformance testsPlasticsPropertiesResinsTestingThermo settingThermoplastic
  • ISO 4593-1993 - 中外标准 - - 1993/11 - 现行
    Specifies a method for the determination of the thickness of a sample of plastics film or sheeting by mechanical scanning. The method is not suitable for use with embossed film or sheeting.
    尺寸扫描设计图测量突出物表面力学塑料塑料薄膜厚度测量厚度试样交付使用CommissioningDimensionsFoilMeasurementMechanicPlansPlastic filmsPlastic sheetsPlasticsProminencesSamplesScanningSurfacesThicknessThickness measurement
回到顶部
选择了条数据