ISO 13761-1996 - 中外标准 - - 1996/12 - 作废
Gives a method for the derivation of reduction factors to be used to obtain the maximum allowable operating pressure for elevated-temperature operation of polyethylene (PE) pipeline systems. Applicable to fluids which do not adversely affect the long-term properties of the polyethylen material at temperatures between 20 °C and 40 °C.
配件聚乙烯管道管道配件管系统塑料管聚乙烯压力管压力调节器标准值工作压力FittingsPE pipesPipe fittingsPiping systemPlastic pipesPolyethylenePressure pipesPressure regulatorsReference valuesService pressure
ISO 4589-1-1996 - 中外标准 - - 1996/12 - 作废
Guidance document for the determination of burning behaviour of plastics by the oxygen index (OI). Provides information to guide the reader in the use of the test procedures described in parts 2 and 3.
氧指数物理试验说明书氧试验性能试验设备测量规程试验条件材料燃烧试验装置燃烧试验易燃性火焰表面传播塑料试验氧浓度浓缩试样燃烧特性测定Burning behavioursBurning testsCombustionConcentrationDeterminationDetermination proceduresFire testsFlammabilityInstructionsMaterialsOxygenOxygen concentrationOxygen indexPhysical testingPlasticsSurface spread of flameTest equipmentTest performanceTest specimensTestingTesting conditionsTesting devices
ISO 4427-1996 - 中外标准 - - 1996/12 - 作废
Specifies the required properties of pipes made from polyethylene (PE) to be used for buried water mains and services and for water supply above ground both inside and outside buildings. In addition, it contains specifications for some general properties of the material from which these pipes are made, including a classification scheme.
ISO 294-3-1996 - 中外标准 - - 1996/12 - 作废
Specifies two two-cavity moulds, the type D1 and D2, for the injection moulding of small plates measuring 60 mm × 60 mm with a preferred thickness of 1 mm (type D1) or 2 mm (type D2) which can be used for a variety of tests. Replaces the second edition of ISO 294.
ISO 9702-1996 - 中外标准 - - 1996/12 - 现行
Specifies a method for the determination of the primary, secondary and tertiary amine group nitrogen content of aliphatic or aromatic amine hardeners for epoxy resins.
催速剂胺环氧衍生物氨值含量测定塑料测定AcceleratorsAmine valueAminesAmines (aliphatic)Amines (aromatic)Content determinationDeterminationDetermination of contentEpoxidesMaterials testingNitrogen contentPaintsPlastics
ISO 4422-1-1996 - 中外标准 - - 1996/12 - 作废
Specifies the general aspects of pipes, joints, fittings and ancillaries, made of unplasticized poly(vinyl chloride) (PVC-U), for piping systems intended to be used for buried water mains and for water supplies above ground, both inside and outside buildings. Replaces ISO 4422:1990.
ISO 4422-3-1996 - 中外标准 - - 1996/12 - 作废
Specifies the characteristics and properties of fittings (injection-moulded and postformed) and joints made of unplasticized poly(vinyl chloride) (PVC-U), to be used for buried water mains and for water supplies above ground, both inside and outside buildings.
ISO 4065-1996 - 中外标准 - - 1996/12 - 作废
Describes the relationship between the nominal wall thickness and the nominal outside diameter of thermoplastics pipes. Applicable to smooth thermoplastics pipes of constant circular cross-section along the whole length of the pipe.
厚度塑料管管塑料定义壁厚管道工程系统热塑性聚合物管壁DefinitionsPipe wallsPipesPipework systemsPlastic pipesPlasticsThermoplastic polymersThicknessWall thicknesses
ISO 12230-1996 - 中外标准 - - 1996/12 - 作废
Gives the minimum values for expected strength as a function of time and temperature in the form of reference lines, for use in calculations on polybutene pipes.
ISO 294-1-1996 - 中外标准 - - 1996/12 - 作废
Contains the general principles to be followed for the preparation of injection moulding test specimens of thermoplastics and gives details of mould design for preparing multipurpose test specimens as specified in ISO 3167 and tensile bars. Replaces the second edition of ISO 294.
塑料试样制备定义热塑性聚合物喷射铸造法试件试验模塑材料试样DefinitionsInjection mouldingInjection moulding machinesInjection moulding processInjection mouldsMoulding materialsPlasticsSpecimen preparationTest barsTest piecesTest specimensTestingThermoplastic polymersTools