CNS 11158-1984 - 中外标准 - - 1984/12 - 现行
ISO 3266-1984 - 中外标准 - - 1984/11 - 作废
Specifies the basic dimensions, material, lifting capacity and conditions of use. The eyebolts may be used for vertical and inclined lifting (see the annex). Applies to eyebolts with and without recessed collar, which are forged in one piece. The eyebolts are suitable for eyehooks of the same lifting capacity.
ISO 3076-1984 - 中外标准 - - 1984/7 - 作废
This second edition, which cancels and replaces ISO 3077:1980, incorporates draft Amendment 1. Specifies the requirements for lifting chains, grade T (8), non-calibrated, for use on cranes, in chain slings and for general lifting purposes. These are electrically welded round steel short link chains, fully heat treated and tested complying with ISO 1834. The range of sizes covered is from 5 to 45 mm. The annex gives a range of temporary additional sizes 6 to 35 mm.
ISO 3077-1984 - 中外标准 - - 1984/7 - 作废
This second edition, which cancels and replaces ISO 3077:1980, incorporates draft Amendment 1. Specifies the requirements for lifting chains, grade T (8), accurately calibrated, for use as load chain in chain hoists and similar appliances. These are electrically welded round steel short link chains, fully heat treated and tested complying with ISO 1834. The range of sizes covered is from 4 to 20 mm. The annex gives a range of temporary additional sizes 6 to 19 mm.
ISO 2262-1984 - 中外标准 - - 1984/6 - 现行
Cancels and replaces the first edition (i.e. ISO 2262:1972). Applies to thimbles suitable for use with steel wire ropes complying with ISO 2408, having a maximum tensile grade of 1770 MPa, with diameters from 4 to 60 mm. Does not apply to thimbles for use with fibre ropes. Reeving thimbles and solid thimbles are not included.
钢丝绳规范提升设备金属丝绳性能试验穿线环绳索试验DesignDiameterDimensionsInformationLifting equipmentLoadingMarkingMaterialsPerformance testingPerformance testsProfile steelsRopesSafe working loadSpecificationsSteelsSteel-wire ropesStressTestingTestsThimblesThimbles (ropes)Tolerances (measurement)Union symbolWire ropes
ISO 5613-1984 - 中外标准 - - 1984/6 - 现行
Specifies the requirements for a range of sprocket assemblies for use in twin outboard chain assemblies. These assemblies incorporate sprocket rings designed to accept chains complying with ISO 610, shackle type connectors complying with ISO 1082, and scraper bars complying with ISO 5612. It tabulates the dimensions and the figures illustrate shapes and reference quantities of concern. An annex gives design formulae.
采掘设备规范作标记设计链传动物料搬运设备采掘链轮尺寸链式输送机Chain conveyorsChain drivesChainwheelsDesignDimensionsMarkingMaterials handling equipmentMiningMining equipmentSpecifications
CNS 10849-1984 - 中外标准 - - 1984/4 - 现行
CNS 10847-1993 - 中外标准 - - 1984/4 - 现行
CNS 10797-1984 - 中外标准 - - 1984/3 - 现行
CNS 10798-1984 - 中外标准 - - 1984/3 - 现行