军事知识服务平台
首页 > 资源导航 > 标准 > 机械 > 通用机械与设备
标准分类
发布日期
全部
订阅
收起
标准
  • ISO 3056-1986 - 中外标准 - - 1986/12 - 现行
    This second edition cancels and replaces the first edition (ISO 3056:1974), of which it constitutes a technical revision. Constitutes a guide to the selection, use, inspection, testing, maintenance and repair of non-calibrated, round steel, short link chains and chain slings. Lifting chains and chain slings may be governed by national and local laws and regulations.
    起重吊索维修圆钢链条利用提升设备链条ChainsHoisting slingsLifting equipmentMaintenanceRound steel chainsSteels
  • ISO 8539-1986 - 中外标准 - - 1986/12 - 作废
    Specifies requirements for forged lifting componentes for use in chain sling assemblies in a range of sizes having performance compatibility with the corresponding nominal sizes of grade T(8) chain. Performance compatibility encompasses component strength and the necessary physical dimensions.
  • ISO 8792-1986 - 中外标准 - - 1986/12 - 现行
    Applies to the regular use of wire sling ropes. For specifications and testing of slings see ISO 7531. The use of wire rope slings is frequently covered by national regulations; these would take precedence over ISO 8792.
    起重吊索利用安全要求检验方法金属丝绳产品金属制品Hoisting slingsProductsSafety requirementsWire ropes
  • ISO 7593-1986 - 中外标准 - - 1986/12 - 现行
    Specifies the requirements, methods of rating and testing of single, two, three and four branch (or leg) chain slings assembled by methods other than welding. Does not apply to chain slings assembled by welding (see ISO 4778), to slings designed to have branches of unequal nominal reach, to endless slings, or to slings designed for special applications.
    名称与符号认证链条提升设备规范尺寸起重吊索作标记CertificationCertification (approval)ChainsDesignationsDimensionsHoisting slingsLifting equipmentMarkingSpecifications
  • ISO 4779-1986 - 中外标准 - - 1986/12 - 现行
    Specifies requirements for lifting hooks as shown in the figure, in a range of sizes having performance compatibility with the corresponding nominal sizes of grade M(4) chain. Performance compatibility encompasses component strength and the necessary physical dimensions.
    试验作标记规范尺寸吊钩提升设备起重钩线环圆钢链条认证CertificationCertification (approval)DimensionsEyeletsHooksLifting equipmentLifting hooksMarkingRound steel chainsSpecificationsSteelsTestingTests
  • 服务由 质检出版社 提供

    GB/T 7021-1986 - 中外标准 - - 1986/11 - 作废
    分类系统设计试验术语离心泵性能分类系统设计试验术语性能离心泵
  • 服务由 质检出版社 提供

    GB/T 6974.12-1986 - 中外标准 - - 1986/11 - 废止
    本标准规定了桥式起重机的专用名词术语。与其他起重机械通用的名词术语见相应的标准。
    起重机桥式起重机术语起重机桥式起重机术语
  • 服务由 质检出版社 提供

    GB/T 6974.6-1986 - 中外标准 - - 1986/11 - 作废
    本标准规定了流动式起重机的专用名词术语。与汽车拖拉机通用的名词术语及其他起重机械通用的名词术语见相应的标准。
    术语起重机移动起重机移动起重机起重机术语
  • 服务由 质检出版社 提供

    GB/T 6974.18-1986 - 中外标准 - - 1986/11 - 现行
    本标准规定了水运港口装卸货物专用的起重机名词术语。在港口使用的通用起重机的名词术语见相应的有关标准。
    起重机术语码头起重机起重机码头起重机术语
  • 服务由 质检出版社 提供

    GB/T 6974.15-1986 - 中外标准 - - 1986/11 - 现行
    本标准规定了悬挂单轨系统的专用名词术语。与其他起重机械通用的名词术语见相应的标准。
    术语单轨系统(工业)架空输送机架空输送机单轨系统(工业)术语
回到顶部
选择了条数据