军事知识服务平台
首页 > 资源导航 > 标准 > 机械 > 通用机械与设备
标准分类
发布日期
全部
订阅
收起
标准
  • TB/T 2540-1995 - 中外标准 - - 1995/12 - 现行
    本标准规定了内嫉、电力机车空气压缩机(以下简称空压机)排风量的试验要求和方法。 本标准适用于安装在内燃、电力机车上的空压机试验。
    内燃机车电力机车空气压缩机压缩机排风量试验方法
  • 服务由 质检出版社 提供

    GB/T 790-1995 - 中外标准 - - 1995/12 - 现行
    本标准规定了电动桥式起重机的跨度和起升高度系列。  本标准适用于电动桥式起重机(以下简称起重机),主要包括吊钩桥式起重机、抓斗桥式起重机、电磁桥式起重机、两用桥式起重机、三用桥式起重机(以上属通用桥式起重机)、慢速桥式起重机、防爆桥式起重机、绝缘桥式起重机、电动单梁起重机和电动葫芦桥式起重机等。其他专用桥式起重机亦应参照使用。
    起重机桥式起重机高度电驱动装置起升高度桥式起重机起重机电驱动装置跨度
  • ISO 13200-1995 - 中外标准 - - 1995/12 - 现行
    Establishes general principles for the design and application of safety signs and hazard pictorials permanently affixed to cranes. Describes the basic safety sign formats, specifies colours for safety signs and provides guidance on developing the various panels that together constitute a safety sign.
    警告危害装卸设备提升设备起重机安全安全标志事故预防安全要求标志定义Accident preventionCranesDefinitionsHandling equipmentHazardsLifting equipmentSafetySafety requirementsSafety signsSignsWarning noticesWarnings
  • ISO 10245-5-1995 - 中外标准 - - 1995/12 - 现行
    Specifies the requirements for limiting and indicating devices of bridges and gantry cranes for loads, motions, performance and environment. General requirements for limiting and indicating devices for cranes are given in ISO 10245-1.
    信号装置起重机移动起重机限定设备规范(批准)安全装置提升设备指示装置龙门起重机桥式起重机装卸设备定义安全要求Bridge cranesCranesDefinitionsGantry cranesHandling equipmentIndicating devicesLifting equipmentLimiting equipmentSafety devicesSafety requirementsSignal devicesSpecification (approval)Travelling cranes
  • ISO 13338-1995 - 中外标准 - - 1995/11 - 作废
    Gives a complete list of the corrosiveness for pure gases and a calculation method relating to the corrosiveness of gas mixtures which is applicable in the absence of experimental data to each of their components.
    气体组织混合气体腐蚀性溶解数学计算CorrosivityDissolutionGas mixturesGasesMathematical calculationsTissue
  • ISO 12482-1-1995 - 中外标准 - - 1995/11 - 作废
    Purpose of this part is to ensure that the design constraints of the intended use of a crane are clearly identified and to define actions to be taken when the crane has been used over a period of time and has approached these constraints, to ensure a new safe working period. A description is given of the special assessment required to monitor the condition of a crane.
    条件控制定义提升装置事故预防提升设备监督(认可)一般条件装卸设备起重机Accident preventionCondition monitoringCranesDefinitionsGeneral conditionsHandling equipmentLifting devicesLifting equipmentSurveillance (approval)
  • ISO 13253-1995 - 中外标准 - - 1995/11 - 作废
    Establishes performance testing and rating criteria for ducted air-conditioners using air- and water-cooled condensers and ducted air-to-air heat pumps. Is limited to systems which use a single refrigeration circuit and have one evaporator and one condenser.
  • 服务由 质检出版社 提供

    GB/T 5657-1995 - 中外标准 - - 1995/7 - 作废
    本标准规定了离心泵的设计制造、工厂检查和试验以及发运方面的Ⅲ类要求。并包含了与泵(包括底座、联轴器和辅助管路,如果驱动机不是与泵构成一个整体,此驱动机除外)的安装、维护和安全有关的设计特性。  本标准适用于一般应用的具有任何驱动和安装形式的单级、多级、卧式或立式结构(联轴器联接或共轴式)离心泵。  在已经要求应用本标准的情况下:  a.又需要一个特殊的设计特性时,可以提出符合本标准意图的另外一些供选择的设计,只要对它们作了详细的说明;  b.可以提出不是完全符合本标准要求的泵供考虑,只要对所有不同点均予以说明。  每当多个文件之间含有相抵触的技术要求时,应按以下顺序决定各文件的适用性:  a.购货定单或询问单(如未发出订单)〔见附录B(参考件)〕;  b.数据表〔见附录A(参考件)〕;  c.本标准;  d.订单货或询问单中提到的其他标准。
    规范离心泵水泵离心泵规范
  • ISO 10973-1995 - 中外标准 - - 1995/7 - 现行
    Guidelines on the general requirements necessary for the preparation and presentation of spare parts manuals for cranes.
    元部件手册备件提升设备装卸设备起重机ComponentsCranesHandbooksHandling equipmentLifting equipmentSpare parts
  • ISO 8566-2-1995 - 中外标准 - - 1995/7 - 作废
    Establishes the criteria for cabins for mobile cranes as defined in ISO 4306-2. These criteria are intended to cover cabins only for crane operation and not for road travel.
    装卸设备保护座舱起重机物料装卸小室工作地点规范BoothsCranesHandling equipmentMaterials handlingProtective cabsSpecificationWorking places
回到顶部
选择了条数据