ISO 22010-2007 - 中外标准 - - 2007/12 - 现行
ISO 22010:2007 describes a process for managing, controlling and monitoring the mass properties of space systems. The relationship between this management plan and the performance parameters for mass properties to be met throughout the mission is described. Ground handling, dynamics analysis and test set-ups that rely on accurate mass properties inputs are identified. ISO 22010:2007 covers all programme phases from pre-proposal through to end of life.
航空器分析重心检验仪器板定义文献惯性力负荷质量(物质)数学计算计划过程控制工艺管理航天安全航天运输航天飞行器规范(验收)稳定性监督(认可)验证重量AircraftAnalysisCentre of gravityChecksControl boardsDefinitionDefinitionsDocumentationsInertia forceLoadingMassMathematical calculationsPlanningProcess controlProcess managementSpace safetySpace transportSpace vehiclesSpecification (approval)StabilitySurveillance (approval)VerificationWeights
ISO 16454-2007 - 中外标准 - - 2007/11 - 现行
ISO 16454:2007 is intended to be used for the determination of the stress/strain distribution and margins of safety in launch vehicles and spacecraft primary structure design. Liquid propellant engine structures, solid propellant engine nozzles and the solid propellant itself are not covered, but liquid propellant tanks, pressure vessels and solid propellant cases are within the scope of ISO 16454:2007. ISO 16454:2007 provides requirements for the determination of maximum stress and corresponding margin of safety under loading, and defines criteria for static strength failure modes, such as rupture, collapse and detrimental yielding. Critical conditions associated with fatigue, creep and crack growths are not covered. Notwithstanding these limitations in scope, the results of stress calculations based on the requirements of ISO 16454:2007 are applicable to other critical condition analyses. In accordance with the requirements of ISO 16454:2007, models, methods and procedures for stress determination can also be applied to the displacements and deformation calculations, as well as to the loads definition, applied to substructures and structural members of structures under consideration. When ISO 16454:2007 is applied, it is assumed that temperature distribution has been determined and is used as input data.
航空航天运输定义负荷数学计算安全软件航天安全航天运输航天飞行器航天器规范(验收)应变应力应力分析结构成分Aerospace transportDefinitionDefinitionsLoadingMathematical calculationsSafetySoftwareSpace safetySpace transportSpace vehiclesSpacecraftSpecification (approval)StrainStressStress analysisStructural component
ISO 23041-2007 - 中外标准 - - 2007/11 - 作废
ISO 23041:2007 establishes standards, current guidelines and uniform procedures to minimize duplication of effort between the customer, the agency, participating nations and the emerging commercial space community. ISO 23041:2007 provides recommended practices for the development of space operations and support documentation, which should facilitate the sharing and exchange of beneficial information between organizations involved with space operations. ISO 23041:2007 establishes a common interface to simplify space operations planning and reduce the effort needed to learn and work with new space programmes and support organizations.
航空航天运输飞行器地面支持设备质量保证消费者定义文献工作手册信息信息交换信息管理情报系统工作规范管理管理技术操作组织规划程序项目管理航天安全航天运输航天飞行器航天器规范(验收)无人驾驶工作任务Aerospace transportConsumersDefinitionDefinitionsDocumentationsHandbooksInformationInformation interchangeInformation managementInformation systemsJob specificationManagementManagement techniquesOperationOrganizationProcedure of projectsProject managementSpace safetySpace transportSpace vehiclesSpacecraftSpecification (approval)UnmannedWorking task
ISO 21460-2007 - 中外标准 - - 2007/10 - 作废
ISO 21460:2007 defines the Proximity-1 space link protocol physical layer. It specifies the channel connection process, provision for frequency bands and assignments, hailing channel, polarization, modulation, data rates, and performance requirements. Currently, the physical layer only defines operations at UHF frequencies for the Mars environment. The coding layer is defined in ISO 21459. The data link layer is defined in ISO 22663. ISO 21460:2007 does not specify individual implementations or products; implementation of service interfaces within real systems; the methods or technologies required to perform the procedures; or the management activities required to configure and control the protocol. The scope and field of application are furthermore detailed in subclause 1.3 of the enclosed CCSDS publication.
通信通信方式数据交换数据传送频率信息交换信息传递物理层无线电通信链路无线电波无线电通信航空无线电通信航天安全航天运输遥测技术CommunicationCommunication processesData exchangeData transferFrequenciesInformation interchangeInformation transferPhysical layersRadio linksRadio wavesRadiocommunicationSpace radiocommunicationsSpace safetySpace transportTelemetry
ISO 22663-2007 - 中外标准 - - 2007/10 - 作废
ISO 22663:2007 defines the Proximity-1 space link protocol data link layer (framing, media access, data services, and input-output sublayers). It specifies the protocol data units, framing, media access control, expedited and sequenced controlled data transfer, timing service, i/o control, as well as the procedures for establishing and terminating a session between a caller and responder. The coding and synchronization sublayer is defined in ISO 21459. The physical layer is defined in ISO 21460. ISO 22663:2007 does not specify individual implementations or products; implementation of service interfaces within real systems; the methods or technologies required to perform the procedures; or the management activities required to configure and control the protocol. The scope and field of application are furthermore detailed in subclause 1.3 of the enclosed CCSDS publication.
航空航天运输飞行安全航空运输数据通信数据通讯量数据流数据格式数据布置数据传输线数据链层数据连接系统数据传送定义电子工程电磁兼容性飞行控制执行信息交换信息系统界面多路存取计算机媒体访问控制航天安全航天运输规范(验收)传输协议Aerospace transportAir safetyAir transportData communicationData communication trafficData flowData formatsData layoutData lineData link layersData link systemData transferDefinitionDefinitionsElectronic engineeringEMCFlight controlImplementationInformation interchangeInformation systemsInterfacesMACMedium access controlSpace safetySpace transportSpecification (approval)Transmission protocol
IEC/PAS 62396-2-2007 - 中外标准 - - 2007/9 - 作废
ISO 22538-1-2007 - 中外标准 - - 2007/9 - 现行
ISO 22538-1:2007 describes a process for the design of oxygen systems and their components. ISO 22538-1:2007 applies equally to ground support equipment, launch vehicles and spacecraft.
航空航天运输航空运输组件定义设计高压高温高压设备液化空气氧压力容器安全密封件航天安全航天运输航天器测试Aerospace transportAir transportComponentsDefinitionDefinitionsDesignHigh pressureHigh temperaturesHigh-pressure plantLiquid airOxygenPressure vesselsSafetySealsSpace safetySpace transportSpacecraftTesting
ISO 21350-2007 - 中外标准 - - 2007/9 - 现行
ISO 21350:2007 contains requirements and guidelines for the utilization of off-the-shelf (OTS) items, their selection, acquisition, integration, qualification and implementation related to a space product or system. Specifically excluded are piece parts and materials, such as electrical, electronic and electromechanical (EEE) parts, thermocouples, rivets, fasteners, connectors, fittings, adhesives, insulation, wiring and plumbing.
航空设备航空航天运输航空运输航空器部件定义开发改进管理成批生产组织计划生产生产控制产品合格测试合格质量质量保证质量保证体系质量管理航天运输规范(验收)Aeronautical equipmentAerospace transportAir transportAircraft componentsDefinitionDefinitionsDevelopmentsImprovementManagementMass productionOrganizationPlanningProductionProduction controlProductsQualification testingQualificationsQualityQuality assuranceQuality assurance systemsQuality managementSpace transportSpecification (approval)
ISO 22538-3-2007 - 中外标准 - - 2007/9 - 现行
ISO 22538-3:2007 describes a process for the selection of non-metallic materials for oxygen systems and their components. ISO 22538-3:2007 applies equally to ground support equipment, launch vehicles and spacecraft.
航空航天运输航空运输组件定义液化空气非金属氧压力容器安全选择航天安全航天运输航天器测试Aerospace transportAir transportComponentsDefinitionDefinitionsLiquid airNon-metalsOxygenPressure vesselsSafetySelectionSpace safetySpace transportSpacecraftTesting
ISO 22538-2-2007 - 中外标准 - - 2007/9 - 现行
ISO 22538-2:2007 describes a process for the selection of metallic materials for oxygen systems and their components. ISO 22538-2:2007 applies equally to ground support equipment, launch vehicles and spacecraft.
航空航天运输航空运输合金铝铜定义液化空气表金属材料氧压力容器安全选择航天安全航天运输航空器测试Aerospace transportAir transportAlloysAluminiumCopperDefinitionDefinitionsLiquid airListsMetallic materialsOxygenPressure vesselsSafetySelectionSpace safetySpace transportSpacecraftTesting