首页 > 资源导航 > 标准 > 石油
发布日期
全部
订阅
收起
标准
  • SY/T 5099-1985 - 中外标准 - - 1985/12 - 作废
  • ISO 2137-1985 - 中外标准 - - 1985/11 - 作废
    Section One gives four procedures for determination of the consistency by measurement of the penetration of a standard cone. Section Two gives methods, when only small samples are available, by the use of cones a half or quarter scale of that used in Section One. The methods are applicable to penetrations of 175 to 385 units. They are not intended to replace the full-scale penetration.
  • GB 5487-1985 - 中外标准 - - 1985/10 - 作废
    汽油石油石油产品燃料辛烷值研究法辛烷值测定
  • GB 5323-1985 - 中外标准 - - 1985/8 - 废止
  • ISO 8006-1985 - 中外标准 - - 1985/8 - 现行
    A test portion is deated in a tared platinum crucible, in a furnace at 700 degrees centigrade, under oxidizing and specified conditions, to constant mass. The residue is cooles and weighed. The method is applicable to products (tar pitch, petroleum pitch, etc.) producing a quality of ash greater than or equal to 0,05 % (m/m).
    灰分生产试验沥青冶炼工业产品电极碳素材料焦油灰分测定AluminiumAsh determinationAshesCarbon materialsElectrodesExtraction metallurgyIndustrial productsProductionTarsTestingTests
  • ISO 8003-1985 - 中外标准 - - 1985/5 - 现行
    Two methods for the measurement are specified: Method A (Ball displacement method): Determination of the viscosity of a pitch at a given temperature determined using a sample of pitch having similar characteristics by measurement of the time a ball, drawn by a defined force, requires to traverse a fixed distance within a measuring tube filled with the sample of molten pitch. Method B (Rotation of a cylindrical body method): Measurement of the shear stress of a substance at a selected rotational speed at a given temperature by means of a system composed of a cylindrical-conical body revolving in the substance contained in a cylindrical vessel.
    试验粘度动力粘度焦油沥青测定碳素材料电极工业产品生产AluminiumCarbon materialsDeterminationDynamic viscosityElectrodesIndustrial productsProductionTarsTestingTestsViscosity
  • 服务由 质检出版社 提供

    GB/T 5096-1985 - 中外标准 - - 1985/4 - 作废
    本方法适用于测定航空汽油、喷气燃料、车用汽油、天然汽油或具有雷德蒸气压不大于124千帕斯卡(930毫米汞柱)的其他烃类、溶剂油、煤油、柴油、馏分燃料油、润滑油和其他石油产品对铜的腐蚀性程度。
    铜腐蚀试验石油产品石油产品铜腐蚀试验
  • 服务由 质检出版社 提供

    GB/T 508-1985 - 中外标准 - - 1985/4 - 现行
    本方法适用于测定石油产品的灰分。
    灰分测定石油产品石油产品灰分测定
  • ISO 7309-1985 - 中外标准 - - 1985/4 - 现行
    Specifies the composition (table 1) and required characteristics (table 2) of a reference fluid used for the testing of hydraulic braking systems and components mounted on road vehicles. Tabulates the physical and chemical characteristics together with units and values and the method of determination to be used.
    道路车辆制动液液压操纵装置化学成份规范液压制动器制动系统Brake fluidsBraking systemsChemical compositionHydraulically-operated devicesRoad vehiclesSpecifications
  • 服务由 质检出版社 提供

    GB/T 4929-1985 - 中外标准 - - 1985/2 - 现行
    本方法适用于测定润滑脂的滴点。
    测量仪器润滑脂滴点测量润滑脂滴点测量测量仪器
回到顶部
选择了条数据