首页 > 资源导航 > 标准 > 石油
发布日期
全部
订阅
收起
标准
  • IEC 61144-1992 - 中外标准 - - 1992/12 - 现行
    Describes a method for measuring the oxygen index of insulating liquids. This test method is applicable to all liquids, the viscosity of which is lower than or equal to 50 mm2/s at 40°C ± 1°C.
    试验仪表电气工程试验方法试样数学计算试验绝缘液体含氧量氧指数AnalysisCalibrationCombustionDefinitionsElectrical engineeringElectrical insulating materialsFire testsFlammabilityGasesInsulating liquidsInsulating materialsMathematical calculationsMeasuring techniquesOxygenOxygen contentOxygen indexRatingsTest apparatusTest methodsTest specimensTestingViscosity
  • 服务由 质检出版社 提供

    GB 13895-1992 - 中外标准 - - 1992/12 - 作废
    本标准规定了以精制矿物油、合成油或二者混合油为基础油,加入多种添加剂配制而成的重负荷车辆齿轮油(GL-5)。  本标准规定的产品适用于在高速冲击负荷,高速低扭矩和低速高扭矩工况下使用的车辆齿轮,特别是客车和其他各种车辆的准双曲面齿轮驱动桥,也可用于手动变速器。  按粘度分为75W、80W/90 、85W/90 、85W/140、90和140 等牌号。
    齿轮运载工具齿轮运载工具
  • 服务由 质检出版社 提供

    GB/T 13894-1992 - 中外标准 - - 1992/12 - 现行
    本标准规定了用量油尺测量容器内石油和液体石油产品液面高度及容器底部游离水高度的方法。  本标准适用于石油和液体石油产品。
    石油产品液体石油液位测量液体石油石油产品液位测量
  • ISO 9091-2-1992 - 中外标准 - - 1992/12 - 废止
    Also sets out the calculation procedures for compiling the calibration tables to be used for the measurement of cargo quantities. Annexes B to F give calibration uncertainty and examples of main gauge table at - 160 °Celsius, trim correction table, list correction table, and correction table for tank shell expansion or contraction.
    造船液化石油气石油产品容量测量海船水箱测量烃类校正轻质烃容器CalibrationCapacity measurementContainersHydrocarbonsLight hydrocarbonsLiquefied petroleum gasMeasurementPetroleum productsShipbuildingShipsTanks (containers)
  • ISO 4259-1992 - 中外标准 - - 1992/12 - 作废
    Covers the calculation of precision estimates and their use to specifications. In particular, it contains definitions of relevant statistical terms, the procedures to be adopted in the planning of an inter-laboratory test programme, the method of calculating the precision from the results of such a programme and the procedure to be followed in the interpretation of laboratory results in relation both to precision of the methods and to the limits laid down in the specification.
  • CNS 13062-1992 - 中外标准 - - 1992/11 - 现行
  • SY/T 5510-1992 - 中外标准 - - 1992/11 - 现行
    本标准规定了油田化学的常用术语。本标准适用于油田化学领域,也适用于石油工业的其他领城。
    油田油田化学术语
  • SY/T 5517-1992 - 中外标准 - - 1992/11 - 现行
    本标准规定了野外石油天然气地质调查阶段划分、工作程序、基本工作方法、技术要求、报告编制、验收制度及安全措施。本标准适用于石油天然气行业野外地质调查。
    野外石油天然气地质调查
  • ISO 91-1-1992 - 中外标准 - - 1992/11 - 作废
    IS0 91-1:1992 refers to petroleum measurement tables published by the American Petroleum Institute (API, USA), the American Society for Testing and Materials (ASTM, USA) and the Institute of Petroleum (IP, UK) and subsidiary documents, correcting the printing errors in these publications, based on reference temperatures of 15 °C and 60 °F. The standard reference temperature for petroleum measurement adopted in IS0 5024 is 15 °C, and should be used for international trade. However, it is recognized that its use is not yet universally accepted and references to tables based on 60 °F have therefore been included in IS0 91-1:1992 and tables based on 20 °C are covered in IS0 91-2.
    技术数据单矿物油石油产品密度石油温度测量温度测量试验表(数据)基准面原油Crude oilsDatumDensityMeasurementMineral oilsPetroleumPetroleum productsTables (data)Technical data sheetsTemperatureTemperature measurementTesting
  • SH/T 0649-1997(2004) - 中外标准 - - 1992/10 - 现行
    化工石油化工化工产品润滑油腐蚀试验法
回到顶部
选择了条数据