BS EN ISO 2719-2002 - 中外标准 - - 2002/12 - 现行
闪点重复试验测定液体试验装置试验石油产品燃烧试验潘斯基-马丁斯仪定义润滑剂可燃液体润滑油试验设备坩锅(实验室)Combustible liquidsCrucibles (laboratory)DefinitionDefinitionsDeterminationFlame testFlash pointLiquidsLubricantsLubricating oilsPensky-MartensPensky-Martens apparatusPetroleum productsRepeat testsTest equipmentTestingTesting devices
ISO 14692-1-2002 - 中外标准 - - 2002/12 - 作废
ISO 14692-1:2002 gives terms and definitions, describes the philosophy and provides guidance on the range of suitable applications, and defines limitations to the materials of construction for the specification, manufacture, testing and installation of glass-reinforced plastic (GRP) piping installations associated with offshore applications on both fixed and floating topsides facilities for oil and gas industry production and processing. It is intended to be used in conjunction with the other parts of ISO 14692. ISO 14692-1:2002 also describes the pressure terminology used in ISO 14692 (all parts).
近海建设工程石油工业使用玻璃纤维增强塑料石油设计管道敷设塑料符号定义材料天然气工业装配天然气试验工业词汇管道ApplicationsDefinitionsDesignEnglish languageGlass-fibre reinforced plasticsIndustriesInstallationMaterialsNatural gasNatural gas industriesOffshore construction worksOil industriesPetroleumPipe layingPipelinesPlastic pipelinesPlasticsSymbolsTestingVocabulary
ISO 10416-2002 - 中外标准 - - 2002/12 - 作废
ISO 10416:2002 provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or make-up fluid. It is not intended as a detailed manual on drilling fluid control procedures. Recommendations regarding agitation and testing temperature are presented because the agitation history and temperature have a profound effect on drilling fluid properties.
ISO 15546-2002 - 中外标准 - - 2002/12 - 作废
ISO 15546:2002 specifies the technical delivery condition, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool joints for use in drilling and production operations in the petroleum and natural gas industries.
ISO 13628-8-2002 - 中外标准 - - 2002/12 - 现行
ISO 13628:2002 gives functional requirements and guidelines for ROV interfaces on subsea production systems for the petroleum and natural gas industries. It is applicable to both the selection and use of ROV interfaces on subsea production equipment, and provides guidance on design as well as the operational requirements for maximising the potential of standard equipment and design principles. The auditable information for subsea systems it offers will allow interfacing and actuation by ROV-operated systems, while the issues it identifies are those that have to be considered when designing interfaces on subsea production systems. The framework and detailed specifications set out will enable the user to select the correct interface for a specific application.
石油工业试验定义运载工具界面天然气规范石油生产技术操作近海建设工程平台天然气工业工业遥控系统水下技术DefinitionsDesignDocumentationsEnglish languageIndustriesInterfacesMaterialsNatural gasNatural gas industriesOffshore construction worksOil industriesOperationPetroleumPlatformsProduction techniquesRemote control systemsSpecificationsSubsea production systemsTestingTransportation unitsUnderwater technologyVehicles
ISO 2909-2002 - 中外标准 - - 2002/12 - 现行
ISO 2909:2002 describes two procedures for calculating the viscosity index (VI) of petroleum products and related materials, such as lubricating oils, from their kinematic viscosities at 40 °C and 100 °C. Procedure A is applicable to petroleum products of viscosity index up to and including 100. Procedure B is applicable to petroleum products of viscosity index 100 or greater. ISO 2909:2002 does not apply to petroleum products with kinematic viscosities less than 2,0 mm2/s at 100 °C. It applies to petroleum products with kinematic viscosities between 2 mm2/s and 70 mm2/s at 100 °C. Equations are provided for calculating the viscosity index of petroleum products having kinematic viscosities above 70 mm2/s at 100 °C.
粘度运动的数学计算石油产品润滑剂定义基准温度运动粘度试验粘度值DefinitionsIndexesKinematicKinematic viscosityLubricantsLubricating oilsMaterials testingMathematical calculationsPetroleum productsReference temperaturesTestingViscosityViscosity numbers
ISO 14692-4-2002 - 中外标准 - - 2002/12 - 作废
ISO 14692-4:2002 gives requirements and recommendations for the fabrication, installation and operation of GRP piping systems for use in oil and natural gas industry processing and utility service applications. The recommendations apply to delivery, inspection, handling, storage, installation, system pressure testing, maintenance, repair and decommissioning. It is intended to be read in conjunction with ISO 14692-1, which includes an explanation of the pressure terminology used in ISO 1469-4:2002.
交付使用近海建设工程石油工业操作玻璃纤维增强塑料定义塑料管道敷设设计石油天然气工业装配试验天然气工业制作安装管道CommissioningDefinitionsDesignEnglish languageFabricationGlass-fibre reinforced plasticsIndustriesInstallationInstallationsManufacturingNatural gasNatural gas industriesOffshore construction worksOil industriesOperationOperational modePetroleumPipe layingPipelinesPlasticsTesting
ISO 13679-2002 - 中外标准 - - 2002/12 - 现行
ISO 13679:2002 establishes minimum design verification testing procedures and acceptance criteria for casing and tubing connections for the oil and natural gas industries. These physical tests are part of a design verification process and provide objective evidence that the connection conforms to the manufacturer''s claimed test load envelope and limit loads. It categorizes test severity into four test classes. It describes a system of identification codes for connections. ISO 13679:2002 does not provide the statistical basis for risk analysis. ISO 13679:2002 addresses only three of the five distinct types of primary loads to which casing and tubing strings are subjected in wells: fluid pressure (internal and/or external), axial force (tension or compression), bending (buckling and/or wellbore deviation), as well as make-up torsion. It does not address rotation torsion, non-axisymetric (area, line or point contact). ISO 13679:2002 specifies tests to be performed to determine the galling tendency, sealing performance and structural integrity of casing and tubing connections that apply to the service application and not to the diameter of the pipe.
连接直管石油气体特性套管天然气工业套管连接管道工程系统钻杆天然气矿物油试验紧固件试验过程机械性能定义石油工业管螺纹连接Ascending pipesBending stressCasing connectionsCasing pipesConnectionsData collectionDefinitionsDrill pipesEnglish languageFastenersMaterialsMechanical propertiesMineral oilsNatural gasNatural gas industriesOil industriesPetroleum gasPipesPipework systemsPropertiesScrewed connectionsSpecification (approval)Test parameterTest resultsTestingTesting proceduresThermal shock enduranceTubes
ISO 14692-2-2002 - 中外标准 - - 2002/12 - 作废
ISO 14692-2:2002 gives requirements for the qualification and manufacture of GRP piping and fittings in order to enable the purchase of GRP components with known and consistent properties from any source. It is applicable to qualification procedures, preferred dimensions, quality programmes, component marking and documentation. ISO 14692-2:2002 is intended to be read in conjunction with ISO 14692-1.
装配石油工业天然气工业质量保证性能要求管道试验天然气工业认证近海建设工程验收检验认可玻璃纤维增强塑料生产管道敷设塑料石油设计定义Acceptance inspectionApplicationsApprovalCertificationDefinitionsDesignEnglish languageGlass-fibre reinforced plasticsIndustriesInstallationMaterialsNatural gasNatural gas industriesOffshore construction worksOil industriesPerformance requirementsPetroleumPipe layingPipelinesPlasticsProductionQuality assuranceSuitabilityTesting
ISO 19900-2002 - 中外标准 - - 2002/12 - 作废
ISO 19900:2002 specifies general principles for the design and assessment of structures subjected to known or foreseeable types of actions. These general principles are applicable worldwide to all types of offshore structures including bottom-founded structures as well as floating structures and to all types of materials used including steel, concrete and aluminium. ISO 19900:2002 specifies design principles that are applicable to the successive stages in construction (namely fabrication, transportation and installation), to the use of the structure during its intended life and to its decommissioning. Generally, the principles are also applicable to the assessment or modification of existing structures. Aspects related to quality control are also addressed. ISO 19900:2002 is applicable to the design of complete structures including substructures, topsides structures, vessel hulls, foundations and mooring systems.
石油开采设计结构设计近海建设工程天然气工业规范海上平台石油工业定义规范(验收)DefinitionsDesignDimensioningEffectsEnglish languageInspectionLoadingMaintenanceNatural gas industriesOffshore construction worksOffshore platformsOil industriesPetroleum extractionQuality assuranceQuality controlSpecificationSpecification (approval)Structural designTesting