首页 > 资源导航 > 标准 > 石油
发布日期
全部
订阅
收起
标准
  • ISO 10426-2-2003 - 中外标准 - - 2003/10 - 现行
    ISO 10426-2:2003 specifies requirements and gives recommendations for the testing of cement slurries and related materials under simulated well conditions.
    天然气工业泥浆石油生产天然气开采水泥石油产品钻井石油工业试验定义Absorptive capacity for waterBore holesCementsDefinitionsEnglish languageNatural gas extractionNatural gas industriesNon-destructive testingOil industriesOil productionPermabilityPetroleum productsSampling methodsSlurriesTestingWells
  • ISO 20764-2003 - 中外标准 - - 2003/10 - 现行
    ISO 20764:2003 specifies two procedures for the preparation of test portions from petroleum and related products boiling above 200 degrees Celsius, which can then be used for the determination of total water content within the range of 3 mg/kg to 1 000 mg/kg. The method is applicable to unused and used lubricating oils, non-aqueous hydraulic fluids and high-boiling solvents. The test portions generated by these procedures are suitable for standard Karl Fischer water-content determinations, such as those described in ISO 6296 and ISO 12937.
    漂洗试样石油材料试验试验设备试验含量测定石油产品含水量样品沸点矿物油取样卡耳费瑟方法抽样方法化学分析和试验Boiling pointChemical analysis and testingDetermination of contentKarl Fischer methodMaterials testingMineral oilsNitrogenPetroleumPetroleum productsRinsingSamplingSampling methodsSpecimensTest equipmentTest specimensTestingWaterWater content
  • ISO 6978-2-2003 - 中外标准 - - 2003/10 - 现行
    This ISO 6978-2:2003 specifies a method for the determination of total mercury content of pipeline quality natural gas using a sampling method by amalgamation on gold/platinum (Au/Pt) alloy thread. This method is applicable to the sampling of raw natural gas when no condensation is present. At atmospheric pressure, this method is suitable for the determination of mercury content within the range of 0,01 microgram /m3 to 100 micrograms/m3 in natural gas samples. At higher pressures (up to 8 MPa), this sampling method is suitable for the determination of mercury contents within the range of 0,001 microgram/m3 to 1 microgram/m3. The collected mercury is determined by measuring the absorbance or fluorescence of mercury vapour at 253,7 nm.
    化学吸附化学分析和试验气体分析天然气抽样方法含量测定AmalgamationChemical analysis and testingChemisorptionDetermination of contentGas analysisGas technologyGold alloysIodineMaterials testingMercuryNatural gasPlatinum alloysSampling methodsTesting
  • CNS 14766-2003 - 中外标准 - - 2003/9 - 现行
  • ISO/TS 29001-2003 - 中外标准 - - 2003/9 - 作废
    ISO/TS 29001:2003 defines the quality management system requirements for the design, development, production, installation and service of products for the petroleum, petrochemical and natural gas industries, based on ISO 9001:2000. Limits are addressed on claims of conformity to ISO/TS 29001:2003 if exclusions are made. ISO/TS 29001:2003 does not address competitive or commercial matters such as price, warranties, guarantees, or clauses intended to sustain commercial objectives.
  • ISO 13503-1-2003 - 中外标准 - - 2003/9 - 作废
    ISO 13503-1:2003 provides consistent methodology for determining the viscosity of completion fluids used in the petroleum and natural gas industries. For certain cases, methods are also provided to determine the rheological properties of a fluid.
  • ISO 20843-2003 - 中外标准 - - 2003/9 - 作废
    ISO 20843:2003 specifies a test method to determine the pH value of non-flammable fluids within categories HFAE, HFAS and HFC, as classified in ISO 6743-4:1999.
  • DIN EN ISO 2719-2003 - 中外标准 - - 2003/9 - 作废
    宾-马氏液体润滑剂试验设备测定润滑油重复试验试验装置宾-马氏仪试验定义坩锅(实验室)可燃液体燃烧试验石油产品闪点Combustible liquidsCrucibles (laboratory)DefinitionDefinitionsDeterminationFlame testFlash pointLiquidsLubricantsLubricating oilsPensky-MartensPensky-Martens apparatusPetroleum productsRepeat testsTest equipmentTestingTesting devicesTests
  • ISO 19901-4-2003 - 中外标准 - - 2003/8 - 作废
    ISO 19901-4:2003 contains requirements and recommendations for those aspects of geoscience and foundation engineering that are applicable to a broad range of offshore structures, rather than to a particular structure type. Such aspects are site characterization, soil and rock characterization, and design and installation of foundations supported by the seabed (shallow foundations) and the identification of hazards. Aspects of soil mechanics and foundation engineering that apply equally to offshore and onshore structures are not addressed. The user of this part of ISO 19901-4:2003 is expected to be familiar with such aspects.
    土壤普查设计石油基础试验稳定性定义土工学天然气工业平台浅基础海上平台天然气工业地震近海建设工程地震荷载石油工业DefinitionsDesignEarthquakesEnglish languageFoundationsGeotechnicsIndustriesNatural gasNatural gas industriesOffshore construction worksOffshore platformsOil industriesPetroleumPlatformsSeismic loadingShallow foundationsSoil surveysSpecification (approval)StabilityTesting
  • ISO 20823-2003 - 中外标准 - - 2003/8 - 现行
    ISO 20823:2003 specifies a test method to determine the relative flammability of fluids when contacted with a hot metal surface at a fixed temperature, but it is also possible to gauge fluid ignition temperatures by adjustment of the manifold temperature. It is primarily used is to assess the resistance to ignition of fire-resistant hydraulic fluids which are, by definition, difficult to ignite. It may be used with other types of more flammable fluids at lower surface temperatures, but this could significantly increase the hazards of this procedure.
    管道水箱危险区域金属表面危险的可裂变物质易燃性表面表面温度危险物质材料试验点火法液体槽罐设备石油产品安全措施精整Danger zonesDangerous materialsDangerous stuffsFinishesFlammabilityHotHot surfacesIgnition methodLiquidsMaterials testingMetallic surfacesPetroleum productsPipelinesSafety measuresSurface temperaturesSurfacesTank installationsTanks (containers)
回到顶部
选择了条数据