首页 > 资源导航 > 标准 > 石油
发布日期
全部
订阅
收起
标准
  • ISO 19901-7-2005 - 中外标准 - - 2005/12 - 作废
    ISO 19901-7:2005 specifies methodologies for a) the design, analysis and evaluation of stationkeeping systems for floating structures used by the oil and gas industries to support production, storage, drilling, well intervention and production, production and storage, drilling, well intervention, production and storage, and b) the assessment of stationkeeping systems for site-specific applications of mobile offshore units (e.g. mobile offshore drilling units, construction units, and pipelay units).
    锚具建筑物检查检验结构要求建筑工程定义设计英语浮动式设备浮动系统工业系泊设备天然气天然气开采天然气工业近海建设工程海上平台石油工业石油生产操作系统石油石油开采平台定位控制安全工程安全要求机座设备规范规范(验收)试验AnchoragesBuilding inspectionChecksConstruction requirementsConstructionsDefinitionsDesignEnglish languageFloating equipmentFloating systemIndustriesMooring devicesNatural gasNatural gas extractionNatural gas industriesOffshore construction worksOffshore platformsOil industriesOil productionOperating systemsPetroleumPetroleum extractionPlatformsPosition controlSafety engineeringSafety requirementsSeating deviceSpecificationSpecification (approval)StationsTesting
  • ISO 16070-2005 - 中外标准 - - 2005/12 - 现行
    ISO 16070:2005 provides the requirements for lock mandrels and landing nipples within the production/injection conduit for the installation of flow control or other equipment used in the petroleum and natural gas industries. ISO 16070:2005 includes the interface connections to the flow control or other equipment, but does not cover the connections to the well conduit.
    钻井钻探设备定义名称与符号钻孔设备设备流量控制吊钩夹持装置心轴物料搬运设备天然气天然气工业短接管石油工业石油石油和天燃气生产设备质量Bore holesBoring equipment (earthworks)DefinitionsDesignationsDocumentationsDrilling equipmentEnglish languageEquipmentFlow controlHangerHoldingsMandrelsMaterials handling equipmentNatural gasNatural gas industriesNipplesOil industriesPetroleumPumping devicesQuality
  • ISO 10426-1-2005 - 中外标准 - - 2005/12 - 作废
    ISO 10426-1:2005 specifies requirements and gives recommendations for eight classes of well cements, including their chemical and physical requirements and procedures for physical testing. ISO 10426-1:2005 is applicable to well cement classes A, B, C, D, E and F, which are the products obtained by grinding Portland cement clinker and, if needed, calcium sulfate as an interground additive. Processing additives can be used in the manufacture of cement of these classes. Suitable set-modifying agents can be interground or blended during manufacture of classes D, E and F. ISO 10426-1:2005 is also applicable to well cement classes G and H, which are the products obtained by grinding Portland cement clinker with no additives other than calcium sulfate or water.
  • ISO 13501-2005 - 中外标准 - - 2005/12 - 作废
    ISO 13501:2005 provides a standard procedure for assessing and modifying performance of solids control equipment systems commonly used in the field in petroleum and natural gas drilling fluids processing. ISO 13501:2005 is not intended for the comparison of similar types of individual pieces of equipment.
  • ISO 13503-3-2005 - 中外标准 - - 2005/12 - 现行
    ISO 13503-3:2005 covers the physical properties, potential contaminants and test procedures for heavy brine fluids manufactured for use in oil and gas well drilling, completion and workover fluids. ISO 13503-3:2005 provides methods for assessing the performance and physical characteristics of heavy brines for use in field operations. It includes procedures for evaluating the density or specific gravity, the clarity or amount of particulate matter carried in the brine, the crystallization point or the temperature (both ambient and under pressure) at which the brines make the transition between liquid and solid, the pH, and iron contamination. It also contains a discussion of gas hydrate formation and mitigation, brine viscosity, corrosion testing, buffering capacity and a standardised reporting form. ISO 13503-3:2005 is intended for the use of manufacturers, service companies and end-users of heavy brines.
    掺和剂盐水洞校正结晶定义设备重量分析液体数学计算天然气工业石油工业石油产品物理性能质量保证流变性能流变学试验粘度粘度测量AdditivesBrine cavernsCalibrationCompletion fluidsCrystallizationsDefinitionsEnglish languageEquipmentGravimetric analysisLiquidsMathematical calculationsNatural gas industriesOil industriesPetroleum productsPhysical propertiesQuality assuranceRheological propertiesRheologySaltsTestingViscosityViscosity measurement
  • SH/T 0099.1-2005 - 中外标准 - - 2005/11 - 现行
    本标准规定了用恩格拉粘度计测量乳化沥青粘度的方法,恩格拉粘度用恩格拉度E<下标t>表示。 本标准未涉及有关使用的安全规定,标准使用者有责任在使用前制定合适的安全应用规程。
    乳化沥青恩格拉粘度测定方法
  • SH/T 0099.15-2005 - 中外标准 - - 2005/11 - 现行
    本标准适用于用带集水器的蒸馏装置通过回流蒸馏测定乳化沥青中的水含量。 本标准规定了采用蒸馏法测定乳化沥青水含量的仪器和方法。 本标准中所用石油混合二甲苯、二甲苯和油漆工业用溶剂易燃且对人体具有毒副作用,实验应在通风柜或通风橱中进行。 本标准未涉及除溶剂以外的其他有关使用的安全规定,标准使用者有责任在使用前制定合适的安全应用规程。
    乳化沥青水含量测定方法蒸馏法
  • SH/T 0099.11-2005 - 中外标准 - - 2005/11 - 现行
    本标准规定了施工现场快速判定乳化沥青与施工集料粘附性的试验方法。 本标准适用于施工现场快速判定乳化沥青与施工集料的粘附性。 本标准未涉及有关使用的安全规定,标准使用者有责任在使用前制定合适的安全规程。
    乳化沥青施工现场粘附试验方法
  • SH/T 0099.6-2005 - 中外标准 - - 2005/11 - 现行
    本标准规定了测定乳化沥青与水泥拌和的试验方法。 本标准适用于鉴定慢凝型乳化沥青,或对阴离子慢凝型乳化沥青和阳离子慢凝型乳化沥青进行分级。 本标准适用于测定慢凝型乳化沥青与水泥拌和而不破乳的能力。 本标准未涉及有关使用的安全规定,标准使用者有责任在使用前制定合适的安全规程。
    乳化沥青水泥沥青
  • SH/T 0099.4-2005 - 中外标准 - - 2005/11 - 现行
    本标准规定了快速测定乳化沥青蒸发残留物百分含量的试验方法。 本标准适用于测定乳化沥青蒸发残留物百分含量。 本标准未涉及有关使用的安全规定,标准使用者有责任在使用前制定合适的安全规程。
    乳化沥青蒸发残留物含量测定测定方法
回到顶部
选择了条数据