SB/T 10445-2007 - 中外标准 - - 2007/12 - 现行
成品油仓储仓储企业管理技术OILSOILSTORAGESSTORAGEENTERPRISESADMINISTRATIONMANAGEMENTTECHNICAL REGULATIONSTECHNICAL RULES
SB/T 10446-2007 - 中外标准 - - 2007/12 - 现行
成品油批发批发企业管理技术OILSOILENTERPRISESADMINISTRATIONMANAGEMENTTECHNICAL REGULATIONSTECHNICAL RULES
GB/T 21267-2007 - 中外标准 - - 2007/12 - 作废
本标准为石油天然气工业用套管及油管螺纹连接规定了必要的验证试验方法及接收准则。所规定的试验是设计验证程序的一部分，并可以为验证螺纹连接的试验载荷包络线和极限载荷与制造厂的声明是否一致提供客观证据。 本标准按螺纹连接服役条件试验分为4个等级。 本标准为螺纹连接编排了识别系统。 本标准不提供风险分析的统计基础。 本标准只涉及油管和套管的上扣扭矩以及油管和套管管柱在井中承受的五种主要载荷中的3种：流体压力（内压和/或外压）、轴向力（拉伸/或压缩）和弯曲（屈曲和/或井筒变形）。不涉及旋转扭矩和非轴对称（面、线、点接触）载荷。 本标准规定的试验目的是确定油管及套管螺纹连接粘扣的趋势、密封性能和结构完整性。油管和套管是根据用途而不是外径来区分的。
石油天然气工业管道管联接器管接头管螺纹PETROLEUMPETROLATUMNATURAL GASINDUSTRIESDUCTSPIPELINEPIPELINESTUBINGAUTOMOTIVE ENGINEERINGPIPE COUPLINGSPIPE CONNECTIONSPIPE NIPPLESPIPEPIPES：TUBESPIPES TUBESPIPESTUBES
DB37/T 849-2007 - 中外标准 - - 2007/12 - 废止
ISO 19902-2007 - 中外标准 - - 2007/12 - 现行
ISO 19902:2007 specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: caissons, free-standing and braced; jackets; monotowers; towers. In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups, other bottom founded structures and other structures related to offshore structures (such as underwater oil storage tanks, bridges and connecting structures), to the extent to which its requirements are relevant. It contains requirements for planning and engineering of the following tasks: design, fabrication, transportation and installation of new structures as well as their future removal; in-service inspection and integrity management of both new and existing structures; assessment of existing structures; evaluation of structures for reuse at different locations.
定义设计地基机械测试天然气工业海上建设工程海上平台石油工业石油开采计划平台项目规划规范规范(验收)钢板钢结构钢结构设计测试工作平台DefinitionsDesignEnglish languageFoundationsMechanical testingNatural gas industriesOffshore construction worksOffshore platformsOil industriesPetroleum extractionPlanningPlatformsProject planningSpecificationSpecification (approval)StagingSteel platesSteel structuresSteelsStructural designTestingWorking platforms
ISO 21809-2-2007 - 中外标准 - - 2007/12 - 作废
ISO 21809-2:2007 specifies the requirements for qualification, application, testing and handling of materials for plant application of single-layer fusion-bonded epoxy (FBE) coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623. High-temperature coatings with a glass transition of above 120 °C or FBE primer coatings for three- or multi-layer polyethylene or polypropylene coatings are not covered by ISO 21809-2:2007. Pipes coated in accordance with ISO 21809-2:2007 are considered suitable for additional protection by means of cathodic protection.
覆层定义企业环氧涂层燃气技术检验作标记天然气工业海上的石油工业顺序示度管道运输管道管粉末覆层护壳规范(验收)测试运输系统地下Coating materialsCoatingsDefinitionsEnglish languageEnterprisesEpoxy coatingsGas technologyInspectionMarkingNatural gas industriesOffshoreOil industriesOrder indicationsPipe transportationPipeline transportationPipelinesPipesPowder coatingsSheathingsSpecification (approval)TestingTransportation systemsUnderground
ISO/TR 10400-2007 - 中外标准 - - 2007/12 - 作废
ISO/TR 10400:2007 illustrates the equations and templates necessary to calculate the various pipe properties given in International Standards, including pipe performance properties, such as axial strength, internal pressure resistance and collapse resistance, minimum physical properties, product assembly force (torque), product test pressures, critical product dimensions related to testing criteria, critical dimensions of testing equipment, and critical dimensions of test samples. For equations related to performance properties, extensive background information is also provided regarding their development and use. Equations presented in ISO/TR 10400:2007 are intended for use with pipe manufactured in accordance with ISO 11960 or API 5CT, ISO 11961 or API 5D, and ISO 3183 or API 5L, as applicable. These equations and templates may be extended to other pipe with due caution. Pipe cold-worked during production is included in the scope of this Technical Report (e.g. cold rotary straightened pipe). Pipe modified by cold working after production, such as expandable tubulars and coiled tubing, is beyond the scope of this Technical Report. Application of performance property equations in ISO/TR 10400:2007 to line pipe and other pipe is restricted to their use as casing/tubing in a well or laboratory test, and requires due caution to match the heat-treat process, straightening process, yield strength, etc., with the closest appropriate casing/tubing product. Similar caution should be exercised when using the performance equations for drill pipe. ISO/TR 10400:2007 and the equations contained herein relate the input pipe manufacturing parameters in ISO 11960 or API 5CT, ISO 11961 or API 5, and ISO 3183 or API 5L to expected pipe performance. The design equations in ISO/TR 10400:2007 are not to be understood as a manufacturing warrantee. Manufacturers are typically licensed to produce tubular products in accordance with manufacturing specifications which control the dimensions and physical properties of their product. Design equations, on the other hand, are a reference point for users to characterize tubular performance and begin their own well design or research of pipe input properties. ISO/TR 10400:2007 is not a design code. It only provides equations and templates for calculating the properties of tubulars intended for use in downhole applications. ISO/TR 10400:2007 does not provide any guidance about loads that may be encountered by tubulars or about safety margins needed for acceptable design. Users are responsible for defining appropriate design loads and selecting adequate safety factors to develop safe and efficient designs. The design loads and safety factors will likely be selected based on historical practice, local regulatory requirements, and specific well conditions. All equations and listed values for performance properties in ISO/TR 10400:2007 assume a benign environment and material properties conforming to ISO 11960 or API 5CT, ISO 11961 or API 5D, and ISO 3183 or API 5L. Other environments may require additional analyses, such as that outlined in Annex D. Pipe performance properties under dynamic loads and pipe connection sealing resistance are excluded from the scope of ISO/TR 10400:2007.
套管定义钻杆燃气管道工业数学计算机械性能计算方法矿物油天然气工业石油工业输油管道管管道工程系统管路特性Casing pipesDefinitionsDrill pipesGas pipelinesIndustriesMathematical calculationsMechanical propertiesMethods of calculationMineral oilsNatural gas industriesOil industriesOil pipelinesPipesPipework systemsPipingPropertiesTubes
ISO 15112-2007 - 中外标准 - - 2007/12 - 作废
ISO 15112:2007 provides the means for the energy determination of natural gas by measurement or by calculation, and describes the related techniques and measures that are necessary to take. The calculation of thermal energy is based on the separate measurement of the quantity, either by mass or by volume, of gas transferred and its measured or calculated calorific value. The general means of calculating uncertainties are also given. Only systems currently in use are described. NOTE Use of such systems in commercial or official trade can require approval of national authorization agencies and compliance with legal regulations is required. ISO 15112:2007 applies to any gas-measuring station from domestic to very large, high-pressure transmission. New techniques are not excluded provided their proven performance is equivalent to, or better than, that of those techniques referred to in ISO 15112:2007. Gas-measuring systems are not the subject of ISO 15112:2007.
ISO 10438-2-2007 - 中外标准 - - 2007/12 - 现行
ISO 10438-2:2007, in conjunction with ISO 10438-1, specifies requirements for oil systems for special-purpose applications. These oil systems can provide lubrication oil, seal oil or both. These systems can serve equipment such as compressors, gears, pumps and drivers.
辅助设备控制系统设计英语工业装配润滑油润滑机械工程矿物油天然气天然气工业石油工业油供应系统石油化学石油生产技术轴封规范供应系统测试Ancillary equipmentControl systemsDesignIndustriesInstallationLubricating oilsLubricationMechanical engineeringMineral oilsNatural gasNatural gas industriesOil industriesOil supply systemsPetrochemistryPetroleumProduction techniquesShaft sealingsSpecificationsSupply systemsTesting
ISO 10438-3-2007 - 中外标准 - - 2007/12 - 现行
ISO 10438-3:2007, in conjunction with ISO 10438-1, specifies requirements for oil systems for general-purpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps and drivers.
辅助设备控制系统设计工业装配润滑油润滑机械工程矿物油天然气天然气工业石油工业油供应系统石油化学石油生产技术油封规范供应系统测试Ancillary equipmentApplicationsControl systemsDesignIndustriesInstallationLubricating oilsLubricationMechanical engineeringMineral oilsNatural gasNatural gas industriesOil industriesOil supply systemsPetrochemistryPetroleumProduction techniquesShaft sealingsSpecificationsSupply systemsTestingUse