首页 > 资源导航 > 标准 > 化工 > 橡胶制品及其辅助材料
标准分类
发布日期
全部
订阅
收起
标准
  • 服务由 质检出版社 提供

    GB 3778-2003 - 中外标准 - - 2003/12 - 作废
    本标准规定了橡胶用炭黑的品种分类、技术要求、试验方法、检验规则和包装、标识、贮存和运输要求。本标准适用于橡胶用炭黑。注:使用本标准的人员应熟悉常规试验室操作,本标准未涉及任何使用中的安全问题,使用者有责任建立恰当的安全和健康措施,并保证符合国家规定。
    天然橡胶规范橡胶炭黑试验合成橡胶trialsspecificationnatural rubbercarbon blackexaminationspecificationstestingsynthetic rubbertestsblack pigmentsrubbertest
  • 服务由 质检出版社 提供

    GB 12731-2003 - 中外标准 - - 2003/12 - 作废
    本标准规定了阻燃V带(以下简称V带)的分类、要求、试验方法、检验规则、标志、包装、运输和储存。本标准适用于阻燃普通V带和阻燃窄V带。
    动力传送带皮带传动beltdrivesbelt drivespower transmission belts
  • ISO 6807-2003 - 中外标准 - - 2003/12 - 现行
    ISO 6807:2003 specifies the requirements for textile- and steel-reinforced rubber hoses and hose assemblies for use with water-based and/or oil-based muds, up to a maximum temperature of 82 °C, which are pumped at high pressure in large volumes in rotary drilling service and which, when tested in accordance with ISO 2977, have a minimum aniline point of 66 °C. This International Standard applies to hoses which are suitable for use at ambient temperatures between -20 °C and +52 °C, unless changed by a supplementary requirement on request of the purchaser, and are resistant to ageing and tropical conditions. This International Standard does not apply to hoses which are intended for use with gases.
    阻尼(波)尺寸振动橡胶软管橡胶制品钻探设备柔性管高压钻削橡胶软管规范旋转钻进压力试验作标记试验名称与符号Boring equipment (earthworks)DampingDefinitionsDesignationsDimensionsDrillingFlexible pipesHigh pressureHosesMarkingPressure testsRotary drillingRubberRubber hosesRubber productsSpecification (approval)SpecificationsTestingVibration
  • ISO 9631-2003 - 中外标准 - - 2003/12 - 作废
    ISO 9631:2003 specifies requirements for materials used in vulcanized-rubber seals for hot potable and non-potable water supply (up to 110 °C). The different seal designations specified are defined according to seal type, seal application and the requirements for a particular seal. General requirements for finished joint seals are also given. Any additional requirements called for by the particular application are specified in the relevant product standards, taking into account that the performance of pipe joints is a function of the seal material properties, seal geometry and pipe joint design. This International Standard is intended to be used where appropriate with product standards which specify performance requirements for joints. This International Standard is applicable to joint seals for use with all pipeline materials, including iron, steel, clay, fibre cement, concrete, reinforced concrete, plastics and glass-reinforced plastics. It is applicable to elastomeric components of composite and non-composite seals. In the case of composite seals made from materials with hardnesses ranging from 76 IRHD to 95 IRHD, the requirements for elongation at break, compression set and stress relaxation apply only when the material participates in the sealing function or contributes to the long-term stability of the seal. Joint rings made from cellular rubber materials or with enclosed voids as part of their design are not covered by this International Standard.
    给水名称与符号密封件材料橡胶制品环形密封圈材料规范规范密封环输水管道管连接件特性分类橡胶热水ClassificationDesignationsHot waterMaterialsMaterials specificationPipe couplingsPropertiesRubberRubber productsSealing ringsSealsSpecificationsToroidal sealing ringsWater pipelinesWater supply
  • ISO 23711-2003 - 中外标准 - - 2003/12 - 现行
    ISO 23711:2003 specifies requirements for materials used for moulded seals made of thermoplastic elastomers (TPEs) for joints in: thermoplastic piping systems for non-pressure waste water discharge (intermittent flow at up to 95 °C) inside buildings; thermoplastic piping systems for non-pressure underground drainage and sewerage (continuous flow at up to 45 °C and intermittent flow at up to 95 °C); thermoplastic rainwater piping systems. General requirements for finished joint seals are also given; any additional requirements called for by the particular application are specified in the relevant product standards taking into account that the performance of pipe joints is a function of the seal material properties, seal geometry and pipe joint design.
    规范(验收)作标记材料排水密封环热塑性聚合物管道给水输水管道密封件试验弹性体定义DefinitionsDrainageElastomersMarkingMaterialsPipelinesSealing ringsSealsSpecification (approval)TestingThermoplastic polymersWater pipelinesWater supply
  • KS M3407-2003 - 中外标准 - - 2003/11 - 现行
  • 服务由 质检出版社 提供

    GB/T 19389-2003 - 中外标准 - - 2003/11 - 作废
    本标准规定了载重汽车轮胎在负荷条件下,测量滚动周长和每单位距离(千米)转数的试验方法。  本标准适用于所有新的载重汽车轮胎。
    商用车辆周长试验载重汽车道路车辆轮胎commercial road vehiclestestsexaminationperimetertyrestrialstestinglorriesroad vehiclestest
  • 服务由 质检出版社 提供

    GB/T 521-2003 - 中外标准 - - 2003/11 - 作废
    本标准规定了轮胎(外胎、内胎和垫带)外缘尺寸的测量工具及其精度要求、测量条件、测量方法、数据计算与处理以及试验报告。  本标准适用于所有新的轿车轮胎、载重汽车轮胎、农业轮胎、工程机械轮胎、工业车辆充气轮胎和摩托车轮胎。
    轮胎测量尺寸measuringsize contenttyresdimensionalmeasurementsmeasurementsizedimensionssizes
  • 服务由 质检出版社 提供

    GB/T 3900-2003 - 中外标准 - - 2003/11 - 作废
    本标准规定了轮胎气门嘴(以下简称气门嘴)的型号标记、结构型式及尺寸规格。  本标准适用于轿车、载重汽车、工业车辆、工程机械、拖拉机与农业、林业机械、摩托车用轮胎的气门嘴,也适用于自行车用轮胎的气门嘴。  本标准不适用于航空轮胎气门嘴。
    轮胎分类系统轮胎气门tyrestyre-valvesclassification systemclassification systemstyre valves
  • 服务由 质检出版社 提供

    GB/T 14828-2003 - 中外标准 - - 2003/11 - 现行
    本标准规定了农业轮胎牵引性能试验的试验条件与方法、试验结果的表述和试验报告。  本标准适用于旱田农业驱动轮胎的牵引性能试验。
    性能轮胎农用设备性能试验农用拖拉机emperformanceperformancepremisestyresperformance testingagricultural tractorsagricultural equipmentperformance testsperformances
回到顶部
选择了条数据