GB/T 6326-2005 - 中外标准 - - 2005/9 - 作废
ISO 2878-2005 - 中外标准 - - 2005/6 - 作废
ISO 2878:2005 specifies a method of determining the electrical resistance of antistatic and conductive products manufactured wholly or in part from rubber whose electrical resistance measured between defined points, when new, does not exceed 3 times 108 ohms and whose conductivity is derived from the addition of carbon black and/or other appropriate substances to the bulk of the material. This International Standard specifies the electrode configuration for basic geometries but reference should be made to relevant product specifications for requirements for specific products. It does not apply to: products were the relevant surfaces are composed of mixtures of insulating and conductive areas; products with a substantial surface area of insulating material (except for footwear, which does not normally have a conductive or antistatic upper).
GB/T 20023-2005 - 中外标准 - - 2005/9 - 现行
橡胶天然橡胶合成橡胶塑料管挠性管RUBBERNATURAL RUBBERSYNTHETIC RUBBERPLASTICPLASTICSPIPEPIPES：TUBESPIPES TUBESPIPESTUBESFLEXIBLE TUBING
ISO 19013-2-2005 - 中外标准 - - 2005/3 - 作废
ISO 19013-2:2005 specifies the requirements for rubber tubing and hoses used in gasoline fuel circuits for internal combustion engines. The gasoline fuels covered include those containing oxygenates such as methanol and methyl tertiary-butyl ether (MTBE) and fuels that have become oxidized (''sour gas''). In addition, this specification may also be applied as a classification system to enable original equipment manufacturers (OEMs) to detail a ''line call-out'' of tests for specific applications where these are not covered by the main types specified. In this case, the hose or tubing would not carry any marking showing the number of this part of ISO 19013 but may detail the OEM''s own identification markings as shown on their part drawings.
液体燃料作标记橡胶制品试验汽油橡胶软管内燃机抗断裂强度橡胶规范尺寸DimensionsGasolineInternal combustion enginesLiquid fuelsMarkingRubberRubber hosesRubber productsSpecificationTearing strengthTesting
ISO 22762-3-2005 - 中外标准 - - 2005/7 - 作废
ISO 22762 applies to elastomeric seismic isolators used to provide buildings or bridges with protection from earthquake damage. The isolators covered consist of alternate elastomer layers and reinforcing steel plates. They are placed between a superstructure and its substructure to provide both flexibility for decoupling structural systems from ground motion, and damping capability to reduce displacement at the isolation interface and the transmission of energy from the ground into the structure at the isolation frequency. ISO 22762-3:2005 specifies the requirements for elastomeric seismic isolators used for buildings and the requirements for the rubber material used in the manufacture of such isolators. The specification covers requirements, design rules, manufacturing tolerances, marking and labelling and test methods for elastomeric isolators.
ISO 18517-2005 - 中外标准 - - 2005/7 - 作废
ISO 18517:2005 provides guidance on the determination of the hardness of vulcanized and thermoplastic rubbers. It is intended to provide an understanding of the significance of hardness as a material property and to assist in the selection of an appropriate test method.
硫化橡胶试样微观硬度试验定义试验材料试验测量热塑性聚合物硬度试验弹性体硬度测量硬度试验设备橡胶测量仪器国际橡胶硬度标度DefinitionsElastomersHardnessHardness measurementHardness testsIRHDMaterials testingMeasurementMeasuring instrumentsMicrohardness testingRubberTest equipmentTest specimensTestingThermoplastic polymersVulcanized rubber
ISO 4081-2005 - 中外标准 - - 2005/4 - 作废
ISO 4081:2005 specifies the requirements for straight or pre-formed rubber hoses and tubing for use in pressurized or unpressurized cooling circuits containing 1,2-ethanediol-based coolants in internal-combustion engines for vehicles with an unladen mass of 3,5 t or less. In addition, this specification may also be applied as a classification system to enable original equipment manufacturers (OEMs) to detail a ''line call-out'' of tests for specific applications where these are not covered by the main types specified. In this case, the hose or tubing would not carry any marking showing this ISO specification number but may detail the OEM''s own identification markings as shown on their part drawings.
ISO 4251-1-2005 - 中外标准 - - 2005/9 - 作废
ISO 4251-1:2005 establishes the designation in use and the dimensions of the ply rating marked series of tyres for agricultural tractors and machines. Tyre load ratings, rim dimensions, and tyre classification and nomenclature are given in ISO 4251-2, ISO 4251-3 and ISO 4251-4 respectively.
牵引车农业机械尺寸轮辋作标记轮胎名称与符号充气轮胎Agricultural machinesDesignationsDimensionsMarkingPneumatic tyresTractorsTyresWheel rims
ISO 18852-2005 - 中外标准 - - 2005/5 - 作废
ISO 18852:2005 specifies a method for the determination of the nitrogen surface area (NSA) of carbon blacks and other rubber compounding ingredients, like silicas and zinc oxides, based on the Brunauer, Emmett and Teller (BET) theory of gas adsorption using a multipoint determination. This test method specifies the sample preparation and treatment, instrument calibration, required accuracy and precision of the experimental data, and calculation of the surface area results from the data obtained. Also given is a procedure for calculating the statistical thickness surface area (STSA), otherwise known as the external surface area. The test method specified uses an automatic volumetric static-vacuum apparatus, the surface area being calculated using the BET theory based on monolayer measurements.
ISO 3033-1-2005 - 中外标准 - - 2005/9 - 现行
ISO 3033-1:2005 specifies certain characteristics of the oil of native spearmint (Mentha spicata L.) in order to facilitate assessment of its quality.