首页 > 资源导航 > 标准 > 化工 > 橡胶制品及其辅助材料
标准分类
发布日期
全部
订阅
收起
标准
  • ISO 3601-3-2005 - 中外标准 - - 2005/11 - 现行
    ISO 3601-3:2005 lays down the quality acceptance criteria of O-rings used in fluid systems, the dimensions of which are standardized in ISO 3601-1, ISO 16031-1 and ISO 16031-2. ISO 3601-3:20051 also defines and classifies surface imperfections on O-rings and specifies maximum acceptable limits for these imperfections. ISO 3601-3:2005 is also applicable to O-rings to be used in aerospace construction.
    验收规范航空航天运输定义流控电路流体技术液压设备液压流体动力液压传动系统缺陷极限(数学)O型密封圈工作特性质量保证质量要求密封件规范(验收)表面环形密封圈Acceptance specificationAerospace transportAir transportDefinitionsFluid circuitsFluid technologyHydraulic equipmentHydraulic fluid powerHydraulic transmission systemsImperfectionsLimits (mathematics)Mechanical engineeringO-ringsPerformance characteristicsQuality assuranceQuality requirementsSealsShape variationsSpace transportSpecification (approval)SpecificationsSurface deviationSurface discontinuitiesSurfacesToroidal sealing rings
  • ISO 3862-2-2005 - 中外标准 - - 2005/10 - 作废
    ISO 3862-2:2005 specifies requirements for five types of spiral-wire-reinforced hydraulic hose and hose assembly of nominal size from 6,3 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB at temperatures ranging from -40 °C to +60 °C. This part of ISO 3862 does not include requirements for end fittings. It is limited to requirements for the performance of hoses and hose assemblies.
  • ISO 4641-2005 - 中外标准 - - 2005/10 - 作废
    ISO 4641:2005 specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies. Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges: ambient temperatures: -25 °C to +70 °C; water temperatures during operation: 0 °C to +70 °C.
  • ISO 1436-2-2005 - 中外标准 - - 2005/10 - 作废
    ISO 1436-2:2005 specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB at temperatures ranging from -40 °C to +60 °C. This part of ISO 1436 does not include requirements for end fittings. It is limited to requirements for the performance of hoses and hose assemblies.
  • ISO 6802-2005 - 中外标准 - - 2005/10 - 作废
    ISO 6802:2005 describes a pressure impulse test with flexing for wire-reinforced rubber and plastics hydraulic hoses and hose assemblies. The test is applicable to high-pressure hydraulic hoses and hose assemblies, which are subject to pulsating pressure in service. This International Standard describes two methods of flexing the hose or hose assembly. The actual pressure impulse test is described in ISO 6803.
    试验柔性管硫化橡胶压力试验脉动流动塑料弯曲试验橡胶软管塑料软管脉动试验金属芯软管橡胶制品软管组件液压软管弯曲金属线水力试验塑料制品增强塑料Bend testingBendingFlexible pipesHose assembliesHosesHydraulic hosesHydraulic testsPlasticsPlastics hosePlastics productsPressure testsPulsating flowPulse testsReinforced plasticsRubber hosesRubber productsTestingVulcanized rubberWire coresWires
  • ISO 4079-2-2005 - 中外标准 - - 2005/10 - 作废
    ISO 4079-2:2005 specifies requirements for five types of textile-reinforced hydraulic hoses and hose assemblies of nominal size from 5 to 100. They are suitable for use with hydraulic fluids HFC, HFAE, HFAS and HFB at temperatures ranging from -40 °C to +60 °C. This part of ISO 4079 does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies.
  • 服务由 质检出版社 提供

    GB/T 3452.3-2005 - 中外标准 - - 2005/9 - 现行
    GB/T 3452的本部分规定了液压气动一般应用的O形橡胶密封圈(以下简称O形圈)的沟槽尺寸和公差。   GB/T 3452的本部分适用于GB/T 3452.1-2005《液压气动用O形橡胶密封圈 尺寸系列及公差》规定的O形圈。工作压力超过10MPa时,需采用带挡圈的结构型式。  注:特殊应用的O形圈沟槽尺寸应由O形圈的制造商和使用者协商确定。
    液压设备尺寸气动设备规则凹槽设计计算环形密封圈天然橡胶HYDRAULIC EQUIPMENTDIMENSIONALDIMENSIONSSIZE CONTENTSIZESSIZEPNEUMATIC EQUIPMENTRULES(INSTRUCTIONS)REGULATIONSRULESRULES (INSTRUCTIONS)RULES:INSTRUCTIONSINDENTATIONSRECESSESDESIGN CALCULATIONSTOROIDAL SEALING RINGS
  • 服务由 质检出版社 提供

    GB/T 6326-2005 - 中外标准 - - 2005/9 - 作废
    本标准规定了轮胎工业用一般术语、轮胎分类、轮胎部位部件、轮胎胎面花纹、轮辋、轮胎尺寸、轮胎性能及其测试、轮胎标志、轮胎外观缺陷、轮胎使用、轮胎翻新与修补的术语及其定义。   本标准适用于轿车轮胎、轻型载重汽车轮胎、载重汽车轮胎、工程机械轮胎、农业轮胎、工业车辆轮胎、摩托车轮胎、力车轮胎、航空轮胎。
    轮胎术语TYRESTERMINOLOGICALTERMSTERMINOLOGYNOMENCLATURE
  • 服务由 质检出版社 提供

    GB/T 20023-2005 - 中外标准 - - 2005/9 - 现行
    本标准规定了以使用温度和爆破压力区分的四种型别无气啧涂用橡胶和/或塑料软管及软管组合件的要求。
    橡胶天然橡胶合成橡胶塑料挠性管RUBBERNATURAL RUBBERSYNTHETIC RUBBERPLASTICPLASTICSPIPEPIPES:TUBESPIPES TUBESPIPESTUBESFLEXIBLE TUBING
  • 服务由 质检出版社 提供

    GB/T 20020-2005 - 中外标准 - - 2005/9 - 作废
    本标准规定了气相二氧化硅的术语和分类、要求、测定方法、检验规则、包装、标识、贮存与运输、采样。  本标准适用于气相法制得的二氧化硅。
    氧化物硅无机化合物SILICONESILICONOXIDESEMOXIDATIVESILICON INORGANIC COMPOUNDS
回到顶部
选择了条数据