服务由 质检出版社 提供
The Calculated Cetane Index by Four Variable Equation is useful for estimating ASTM cetane number when a test engine is not available for determining this property directly and when cetane improver is not used. It may be conveniently employed for estimating cetane number when the quantity of sample available is too small for an engine rating. In cases where the ASTM cetane number of a fuel has been previously established, the Calculated Cetane Index by Four Variable Equation is useful as a cetane number check on subsequent batches of that fuel, provided the fuel''s source and mode of manufacture remain unchanged.
Note 28212;Test Methods D6890 and D7170 may be used to obtain a Derived Cetane Number (DCN) when the quantity of sample is too small for an engine test. These methods do measure the effect of cetane improver.
Within the range from 32.5 to 56.5 cetane number, the expected error of prediction of Procedure A of the Calculated Cetane Index by Four Variable Equation will be less than x00B1;2 cetane numbers for 65 % of the distillate fuels evaluated. Errors may be greater for fuels whose properties fall outside the recommended range of application.
1.1 The calculated Cetane Index by Four Variable Equation provides a means for estimating the ASTM cetane number (Test Method D613) of distillate fuels from density and distillation recovery temperature measurements. The value computed from the equation is termed the Calculated Cetane Index by Four Variable Equation.
1.2 The Calculated Cetane Index by Four Variable Equation is not an optional method for expressing ASTM cetane number. It is a supplementary tool for estimating cetane number when a result by Test Method D613 is not available and if cetane improver is not used. As a supplementary tool, the Calculated Cetane Index by Four Variable equation must be used with due regard for its limitations.
1.3 Procedure A is to be used for Specification D975, Grades No. 1x2013;D S15, No. 1x2013;D S500, No. 1x2013;D S5000, No. 2x2013;D S15, No. 2x2013;D S5000, and No. 4x2013;D. This method for estimating cetane number was developed by Chevron Research Co. Procedure A is based on a data set including a relatively small number of No. 1x2013;D fuels. Test Method D4737 Procedure A may be less applicable to No. 1x2013;D S15, No. 1x2013;D S500, and No. 1x2013;D S5000 than to No. 2x2013;D grade S5000 or to No. 4x2013;D fuels.
1.3.1 Procedure A has been verified as applicable to Grade No. 2x2013;D S15 diesel fuels.
1.4 Procedure B is to be used for Specification D975, Grade No. 2x2013;D S500.
1.5 The test method x201C;Calculated Cetane Index by Four Variable Equationx201D; is particula......