首页 > 资源导航 > 标准 > 化学 > 化工综合
标准分类
发布日期
全部
订阅
收起
标准
  • ISO 22489-2006 - 中外标准 - - 2006/12 - 作废
    ISO 22489:2006 specifies requirements for the quantification of elements in a micrometre-sized volume of a specimen identified through analysis of the X-rays generated by an electron beam using wavelength-dispersive spectrometers fitted either to an electron probe microanalyser or to a scanning electron microscope. It describes the principle of the quantitative analysis, the general coverage of this technique in terms of elements, mass fractions and reference specimens, the general requirements for the instrument, and the fundamental procedures involved, such as specimen preparation, selection of experimental conditions, the measurements, the analysis of these and the report. It is intended for the quantitative analysis of a flat and homogeneous bulk specimen using a normal incidence beam. It does not specify detailed requirements for either the instruments or the data reduction software. Operators should obtain information such as installation conditions, detailed procedures for operation and specification of the instrument from the makers of any products used.
    分析分析方法块状物料电子束微量分析参数定量的定量分析光谱学波长色散AnalysisAnalysis methodsBulk materialsElectron beamsMethods of analysisMicroanalysisParametersQuantitativeQuantitative analysisSpectroscopyWavelength dispersive
  • ISO 23833-2006 - 中外标准 - - 2006/12 - 作废
    ISO 23833:2006 is a bilingual (English/French) vocabulary which defines terms used in the practices of electron probe microanalysis (EPMA). It covers both general and specific concepts classified according to their hierarchy in a systematic order. It is applicable to all standardization documents relevant to the practices of EPMA. In addition, some parts of the standard are applicable to those documents relevant to the practices of related fields (e.g. SEM, AEM, EDX) for definition of those terms common to them.
    分析分析方法定义电子束法语分析的方法微量分析多语种的术语词汇AnalysisAnalysis methodsDefinitionsElectron beamsFrench languageMethods of analysisMicroanalysisMultilingualTerminologyVocabulary
  • ISO 18516-2006 - 中外标准 - - 2006/11 - 现行
    ISO 18516:2006 describes three methods for measuring the lateral resolution achievable in Auger electron spectrometers and X-ray photoelectron spectrometers under defined settings. The straight-edge method is suitable for instruments where the lateral resolution is expected to be larger than 1 micrometre. The grid method is suitable if the lateral resolution is expected to be less than 1 micrometre but more than 20 nm. The gold-island method is suitable for instruments where the lateral resolution is expected to be smaller than 50 nm. Annexes A, B and C provide illustrative examples of the measurement of lateral resolution.
    螺旋电子光谱法化学分析和试验数据分析定义精整测量光电子的定量分析光谱测定法光谱学平尺表面化学表面X射线光度法Auger electron spectroscopyChemical analysis and testingData analysisDefinitionDefinitionsFinishesMeasurementPhotoelectronicsQuantitative analysisSpectrometrySpectroscopyStraightedgesSurface chemistrySurfacesX-ray spectrometry
  • ISO 16592-2006 - 中外标准 - - 2006/9 - 作废
    ISO 16592:2006 gives guidance on a method for the determination of the carbon content in steels containing other alloying elements (less than 1 % to 2 % by mass) using the calibration curve method. It specifies the sample preparation, X-ray detection, establishment of the calibration curve and the procedure for the determination of the uncertainty of the measured carbon content. It is applicable to steels containing a mass fraction of copper of less than 1,0 %. The method is not applicable to steels with higher carbon contents, which could significantly affect the accuracy of the analysis results. ISO 16592:2006 applies to analyses performed using normal beam incidence and wavelength-dispersive X-ray spectrometry; it is not designed to be used for energy-dispersive X-ray spectrometry.
  • ISO/TR 18394-2006 - 中外标准 - - 2006/8 - 作废
    ISO/TR 18394:2006 provides guidelines for identifying chemical effects in X-ray or electron-excited Auger-electron spectra and for using these effects in chemical characterization.
    Auger electron spectroscopyChemical analysis and testingFinishesSpectroscopySurfacesX-ray spectrometerX-ray spectrometryAuger electron spectroscopyChemical analysis and testingFinishesSpectroscopySurfacesX-ray spectrometerX-ray spectrometry
  • HG/T 3811-2006 - 中外标准 - - 2006/7 - 现行
    本标准规定了工业溴化物试验方法。 本标准适用于工业溴化物产品。描述了产品的测定技术。在制备试验溶液时,应参考与所分析产品有关的标准对本方法进行必要的修改,使其适合产品的测定。
    工业溴化物溴化物试验方法
  • NY/T 1150-2006 - 中外标准 - - 2006/7 - 现行
    本标准规定了烟花爆竹产品认可证书的申请、产品审定、产品认可证书的发放等安全管理的要求。 本标准适用于烟花爆竹产品(含引火线、发射药、烟火药)认可证书的申请。
    烟花爆竹产品认证管理规范
  • 服务由 质检出版社 提供

    GB/Z 20288-2006 - 中外标准 - - 2006/6 - 废止
    本指导性技术文件规定了电子电气产品及其部件和材料拆分的通用原则。  本指导性技术文件适用产品范围为电子电气产品及其部件和材料。
    电子设备及元件毒物有毒物质毒素规范试验含量测定ELECTRONIC EQUIPMENT AND COMPONENTSPOISONSTOXICTOXIC MATERIALSTOXIC SUBSTANCESTOXINSSPECIFICATIONSPECIFICATIONSEXAMINATIONTESTTRIALSTESTINGREFRACTORY PRODUCTSDEPOSITCRUDE OILSTESTSbristlesCONTENT DETERMINATIONCONTENT DETERMINATIONSDETERMINATION OF CONTENT
  • IEC TR 62432-2006 - 中外标准 - - 2006/3 - 现行
    identifies the terminology, definitions, theory and methodology used for the determination of rH values or redox systems in aqueous solvent or aqueous-organic solvent mixtures.
  • IEC TR 62434-2006 - 中外标准 - - 2006/3 - 现行
    specifies the terminology, definitions, methodology, requirements for statements by manufacturers and performance tests for analyzers, sensor units and electronic units used for the determination of pH value in non-aqueous and aqueous-organic solvent mixtures.
回到顶部
选择了条数据