Development and Characterization of Ultraviolet Energy Sensor Based on Sapphire Down-Conversion
摘要
紫外能量传感器是光刻机中监测曝光光源能量的关键零部件.文章基于荧光下转换技术路线,研制了由蓝宝石晶体、光电二极管、信号处理电路、滤光片、机械结构件等组成的紫外能量传感器;采用光学非共轴空间布局,实现多界面光热能量耗散,提高传感器工作稳定性、抗激光损伤能力;提出基于仿真预测的晶体多自由度互相补偿安装方法,提高响应均匀性;采用近红外增强光电二极管,两级放大、差分输出的电路结构,提高传感器重复性.通过相关双光路对比法,减小光源能量波动对测试结果的影响,完成传感器相关性能参数高精度测试表征;测试结果显示,在波长为193 nm、脉宽为10 ns、能量为10 mJ、重频为1 000 Hz的条件下,其重复性小于0.08%、非线性度达到0.018%、响应频率达到13.9 kHz、不稳定性达到0.005%、非均匀性达到0.23%/mm、抗强光损伤能力大于1.5×107个脉冲,可应用于相关光刻机曝光能量实时监测.
Ultraviolet energy sensors are key components for monitoring exposure light source intensity in lithography machines.Based on fluorescence down-conversion,herein we developed an ultraviolet energy sensor composed of a sapphire crystal,a photodiode,a signal-processing circuit,an optical filter,and mechanical structural components.A non-coaxial optical configuration was adopted to achieve multi-interface photothermal energy dissipation,improving both operational stability and laser-induced damage resistance.To enhance response uniformity,a multi-degree-of-freedom mutual compensation installation method based on simulation predictions was proposed.A near-infrared enhanced photodiode,a two-stage amplification,and a differential output circuit structure were adopted to improve the sensor's repeatability.Furthermore,a dual-path correlation comparison method was used to mitigate the impact of source energy fluctuations,enabling high-precision testing and characterization of sensor performance.The test results show that the repeatability was less than 0.08%,nonlinearity was 0.018%,response frequency reached 13.9 kHz,instability reached 0.005%,non-uniformity reached 0.23%/mm,and resistance to intense light damage exceeded 1.5×107 pulses,demonstrating its viability for real-time exposure energy monitoring in lithography machines.