军事知识服务平台
质子交换膜燃料电池金属双极板非晶薄膜研究进展
Research Progress on Amorphous Thin Films for Metallic Bipolar Plates in Proton Exchange Membrane Fuel Cells
摘要 双极板是质子交换膜燃料电池堆的关键组件,承担气体阻隔、热量管理及电子传导等多重功能,其性能直接影响电池的整体效率与寿命.金属双极板虽具备高力学强度、优异导热导电性及规模化制造优势,但在严苛工况下易发生腐蚀,导致表面形成高电阻钝化层,显著增加界面接触电阻,削弱导电性能.为解决这个问题,表面沉积非晶薄膜被视为是提升双极板耐腐蚀性和导电性的有效策略.详细论述了碳基、碳-金属复合、氮化物和多元复合非晶薄膜这4 类双极板非晶薄膜的发展状况和最新进展,系统梳理磁控溅射、弧离子镀和电化学镀等制备技术对非晶薄膜性能的影响,并在制备工艺创新与界面结构设计、开发耐腐蚀碳载体与抗污染催化剂层和融合人工智能等方面对表面改性非晶薄膜作出了展望.
Abstract:
As a multifunctional component within proton exchange membrane fuel cell stacks,bipolar plates play a critical role in gas distribu-tion,thermal management,electrical conductivity,and structural support.Metal-based bipolar plates exhibit high mechanical strength,favora-ble thermal conductivity,and potential for large-scale manufacturing.However,they remain susceptible to corrosion and surface passivation un-der the harsh operating conditions of fuel cells,including acidic environments,elevated temperatures,and high humidity.This leads to in-creased interfacial contact resistance and reduced electrical conductivity,significantly impacting fuel cell efficiency and service life.Addressing this bottleneck,amorphous films have emerged as a focal point in surface engineering research for enhancing bipolar plate performance,owing to their unique physicochemical properties derived from their long-range disordered atomic structure.This paper systematically reviewed the de-velopment status and latest advances in carbon-based,carbon-metal composite,nitride,and multi-component composite amorphous films.It further examined the effects of mainstream preparation techniques,including magnetron sputtering,arc ion plating,and electrochemical plat-ing,on amorphous film properties.Carbon-based amorphous films,owing to their high hardness and chemical inertness,can be optimized by regulating sp2/sp3 bonding configurations,making them suitable for constructing functional layers combining protective properties with moderate conductivity.Carbon-metal composite amorphous films,through the introduction of metallic elements,effectively alleviated in-film stresses,enhanced film-substrate adhesion,and improved electron transport efficiency,establishing stable conductive pathways while suppressing sub-strate corrosion.Nitride amorphous films,characterized by strong transition metal-nitrogen bonding,exhibited exceptional chemical stability due to their dense structure,effectively blocking corrosive ion migration and localized corrosion.Multi-component composite amorphous films achieved a balance between structural compactness,electrical conductivity,and environmental adaptability through synergistic integration of carbon,nitrogen,metallic,and oxide elements.Their multi-layered nanocomposite structure significantly enhanced interface stability and service life.Regarding fabrication techniques,magnetron sputtering offered strong structural control and process adaptability,enabling controlled deposition of uniform,dense films suitable for complex substrate surface treatments.Arc ion plating met mass production demands owing to its high deposition rate and strong film adhesion.Electrochemical deposition had emerged as a research focus due to its low cost,operational simplicity,and tunable doping capabilities.Moreover,emerging techniques such as flame deposition,sol-gel synthesis,and plasma-enhanced chemical vapor deposition demonstrated potential in specific application scenarios.Despite significant advances in amorphous films for bipolar plate modification,challenges persisted regarding adhesion durability under high-temperature thermal cycling,micro-defect-induced failure mechanisms,and long-term electrical performance retention.Currently,carbon-metal composite films and nitride films offered the opti-mal balance between performance and engineering adaptability.Future research should focus on multi-layered,structurally ordered film designs to improve interfacial fault tolerance.Researchers can leverage data-driven approaches such as artificial intelligence for material screening and process optimization.Concurrently,deep integration of surface coating techniques with the bipolar plate bulk manufacturing process represented a key pathway to achieving large-scale,high-consistency,and cost-controllable production.This paper provided theoretical references for the design and fabrication of amorphous films on metallic bipolar plates for proton exchange membrane fuel cells.
刊 名 材料保护 ISTIC
年,卷(期): 2026, 59(10)
分类号: TQ426.83
机标分类号: TG174.444 TM910.3 TQ323.8
在线出版日期: 2026年11月11日