军事知识服务平台
考虑风向的波形腹板钢梁对流换热系数研究
Convective heat transfer coefficient of corrugated web steel girders considering wind direction
摘要 波形腹板钢梁在太阳辐射和气温变化作用下易产生显著的非均匀温度分布,进而引起结构次内力,影响其长期性能与安全.现有研究多采用恒定风速简化计算对流换热系数,忽略了实际风环境中风向与风速的空间变异性,导致温度场模拟精度不足.为提升该类结构在风-热耦合环境下的温度场模拟精度,本研究系统分析了风向对其对流换热系数的影响,建立了考虑风向差异的分区计算公式.以波形腹板钢梁的缩尺模型为研究对象,开展长期监测,获取结构温度分布与环境气象数据.基于COMSOL Multiphysics 6.0建立风-热耦合有限元模型,分别模拟横风、纵风和斜风3种风向下的强制对流与自然对流过程,并对14个表面进行对流换热系数拟合,得到考虑风向影响的分区计算公式.进一步将所得公式嵌入温度场模型,进行长期温度场模拟,并与实测数据对比验证.研究结果表明,各表面对流换热系数在时间上保持稳定,仅随风速变化.不同风向下各表面的对流换热系数存在显著差异,表明风向是影响对流换热强度的关键因素.长期温度场模拟结果显示,在夏季高温时段,基于湍流对流换热系数计算得到的温度分布与实测数据吻合良好,而在冬季低温条件下,采用传导对流换热系数可获得更为准确的计算结果.建议在实际应用中,当环境气温持续高于20℃时,采用湍流对流换热系数进行波形腹板钢梁的温度场计算,当气温普遍低于20℃时,则宜采用传导对流换热系数.研究结果为进一步提升波形腹板钢梁温度场模型的预测精度,优化其在复杂风热耦合环境下的温度效应分析与结构设计提供了一定的参考.
Abstract:
Corrugated web steel girders are susceptible to significant non-uniform temperature distributions under solar radiation and varying ambient temperatures.These temperature gradients can induce secondary internal forces,potentially compromising the structure's long-term performance and safety.Many current studies simplify the calculation of the convective heat transfer coefficient by assuming a constant wind speed.This approach may neglect the spatial variability of both wind direction and speed in actual wind environments.Consequently,this oversimplification can reduce the accuracy of temperature field simulations.To enhance the accuracy of temperature field simulation for such structures under wind-thermal coupling conditions,this study aimed to systematically analyze the influence of wind direction on their convective heat transfer coefficient and to establish partitioned calculation formulas that consider the differences in wind direction.This study utilized a scaled-down model of a corrugated web steel girder.Long-term monitoring was conducted to acquire comprehensive data on structural temperature distribution and ambient meteorological conditions.Using COMSOL Multiphysics 6.0,this paper developed a wind-thermal coupling model.This model simulated both forced and natural convection processes under three wind directions:crosswind,longitudinal wind,and oblique wind.Subsequently,it fitted the convective heat transfer coefficients for 14 distinct surfaces.These analyses yielded zoned calculation formulas that account for wind direction effects.These formulas were then integrated into the temperature field model to perform long-term simulations.The simulation results were rigorously compared against experimental measurements for validation.Results indicate that the convective heat transfer coefficients for each surface remain temporally stable and vary solely with wind speed.Significant variations in these coefficients are observed across different wind directions,identifying wind direction as a critical factor influencing convective heat transfer intensity.Long-term temperature field simulations demonstrate that during summer high-temperature periods,temperature distributions calculated using the turbulent convective heat transfer coefficient show strong agreement with measured data.In contrast,during winter low-temperature conditions,more accurate results are obtained using the conductive convective heat transfer coefficient.For practical applications,it can recommend using the turbulent convective heat transfer coefficient for temperature field calculations of corrugated steel web box girders when ambient temperatures consistently exceed 20℃.When temperatures generally fall below 20℃,the conductive convective heat transfer coefficient should be employed.The research results can provide a reference for further improving the prediction accuracy of the temperature field model for corrugated web steel girders and for optimizing their thermal effect analysis and structural design under complex wind-thermal coupling conditions.
刊 名 铁道科学与工程学报 ISTICEIPKU
年,卷(期): 2026, 23(9)
分类号: TU398+.9
机标分类号: TU83 X173 TK124
在线出版日期: 2026年10月27日
基金项目: 52378546:国家自然科学基金2024JJ4065:湖南省自然科学基金资助项目kq2306013:长沙市杰出创新青年培养计划,