军事知识服务平台
接触线布置与摩擦特性对受电弓滑板磨损的耦合作用研究
Coupling effect of contact wire arrangement and friction characteristics on wear of pantograph strips
摘要 针对地铁受电弓滑板出现的凹槽形磨损与偏磨两种典型异常磨损形状问题,该研究旨在揭示接触线布置方式与摩擦因数对滑板磨损分布的耦合影响机制.在弓网摩擦磨损有限元仿真中,设定滑板按不同拉出值规律运动以等效模拟接触线布置方式,引入考虑电流效应的滑板磨损计算模型,定量分析单正弦波形与单Z字形两种接触线布置方式对滑板横向磨损分布的影响规律.基于摩擦副运动学理论,建立了摩擦因数-接触倾角耦合模型,以探究摩擦因数变化对滑板纵向偏磨现象的作用机理.仿真工况下,单正弦波形布置因拉出值变化率在最大拉出值处骤降,导致滑板在该区域的摩擦距离远高于其他部位,从而形成显著的局部凹槽,而单Z字形布置因拉出值变化率较为固定,使得滑板磨损分布更为均匀.摩擦因数的增大会引起接触倾角增大,进而引起接触压力与电流在滑板前缘显著集中,加剧纵向磨损梯度.滑板纵向偏磨主要由机械磨损引起,而接触线布置方式则主要影响横向磨损形态.为改善弓网接触状态并延长滑板使用寿命,在工程中可采用拉出值变化率分布更为均匀的接触线布置方式并选用摩擦因数较小的滑板材料,以有效减缓滑板的异常磨损,提升弓网系统的服役可靠性.
Abstract:
Aiming at the problem of two typical abnormal wear shapes,namely groove-shaped wear and biased wear,occurring on metro pantograph carbon strips,this research revealed the coupled influence mechanism of contact wire arrangement and friction coefficient on the wear distribution of the strips.In the finite element simulation of pantograph-catenary friction and wear,the pantograph strip was set to move according to different stagger value patterns to equivalently simulate the contact wire arrangement methods.A strip wear calculation model considering the current effect was introduced to quantitatively analyze the influence of two contact wire arrangements—single sinusoidal wave and single Z-shape—on the transverse wear distribution of the strip.Based on the kinematic theory of the friction pair,a coupled friction coefficient-contact inclination angle model was established to investigate the mechanism by which changes in the friction coefficient affect the longitudinal biased wear of the strip.Under simulated conditions,the single sinusoidal wave arrangement,due to the sharp drop in the rate of change of the stagger value at the maximum stagger position,results in a significantly longer friction distance of the strip in this area compared to other regions,thereby forming a pronounced local groove.In contrast,the single Z-shape arrangement,due to its relatively fixed rate of change of the stagger value,leads to a more uniform wear distribution on the strip.An increase in the friction coefficient causes an increase in the contact inclination angle,which in turn leads to a significant concentration of contact pressure and current at the leading edge of the strip,exacerbating the longitudinal wear gradient.The longitudinal biased wear of the strip is primarily caused by mechanical wear,while the contact wire arrangement mainly affects the transverse wear morphology.To improve the pantograph-catenary contact state and extend the service life of the strips,contact wire arrangements with a more uniform distribution of the rate of change of the stagger value can be adopted in engineering,and strip materials with a smaller friction coefficient can be selected.The research results can effectively mitigate the abnormal wear shapes of the strips and enhance the service reliability of the pantograph-catenary system.
刊 名 铁道科学与工程学报 ISTICEIPKU
年,卷(期): 2026, 23(9)
分类号: U225
机标分类号: TH117.1 U463.341 U225
在线出版日期: 2026年10月27日
基金项目: N2022J044:中国国家铁路集团有限公司科技研究开发计划,