Research on electrical characteristics of AC electric arc furnace based on flexible power supply and distribution scheme
摘要
基于柔性供配电方案的交流电弧炉(简称"柔性交流电弧炉")作为一种新型的电弧炉技术,具有系统控制精度高与响应速度快的特点,可实现电弧功率的无级调节,这对于降低电弧炉冶炼能耗具有重要意义.然而,目前针对该类型的电弧炉负载电气特性的分析尚未形成统一有效的方法,且缺乏对其供电模式的分析与运行边界的界定.因此,本文以柔性交流电弧炉的变流器输出电压、电流为自变量,以功率等为因变量,构建负载电气运行图,并以变流器额定容量约束、预设功率因数约束为条件,建立电弧炉的功率圆图.基于此,得到了柔性交流电弧炉在两种控制模式下不同输出对应的运行工况及其稳定运行区域,揭示了不同弧长对功率分配及冶炼效率的影响规律,并通过电弧炉运行点功率需求分析,发现了电流控制模式下可以有效避免运行点漂移的风险,显著提升系统控制的精确性与可靠性.上述结果为电弧炉供电曲线的制定与供电策略的选取提供了理论基础.
The AC arc furnace based on the flexible power supply and distribution scheme(hereinafter referred to as"flexible AC arc furnace")is a new type of arc furnace technology,featuring high system control accuracy and fast response speed.It can achieve stepless regulation of arc power,which is of great significance for reducing the energy consumption of arc furnace smelting.However,at present,there is no unified and effective method for ana-lyzing the electrical characteristics of this type of arc furnace load,and there is a lack of analysis of its power supply mode and definition of the operating boundaries.Therefore,this paper takes the output voltage and current of the converter of the flexible AC arc furnace as independent variables and power as dependent variables to construct the load electrical operation diagram.With the rated capacity constraint of the converter and the preset power factor constraint as conditions,the power circle diagram of the arc furnace is established.Based on this,the operating conditions and stable operation regions corresponding to different outputs under two control modes of the flexible AC arc furnace are obtained,and the influence laws of different arc lengths on power distribution and smelting efficien-cy are revealed.Through the analysis of the power demand of the arc furnace operating point,it is found that the current control mode can effectively avoid the risk of operating point drift and significantly improve the accuracy and reliability of system control.The above results provide a theoretical basis for the formulation of the arc furnace pow-er supply curve and the selection of power supply strategies.