军事知识服务平台
双向拉伸聚酯膜张幅过程中弯曲畸变形成的数值模拟
摘要 采用逐步双向拉伸制备双向拉伸聚酯膜时,膜平面内会产生弯曲畸变,导致膜边缘和中间部分的光学、力学等性能不均一,膜品质劣化而不能顺利应用于光学产品领域.聚酯膜在高于玻璃化转变温度而低于熔点的拉伸温度下,大分子处于高弹态,且存在由结晶形成的物理交联点.基于该特点,本研究通过对聚酯膜单向拉伸及应力松弛试验结果分别进行拟合,确定模型参数,得到了描述超弹性的 Mooney-Rivlin多项式的2 阶系数及描述黏性的 Prony 级数的3 阶系数,从而建立了聚酯膜的黏性-超弹模型.分别采用各向同性弹性、正交各向异性弹性、塑性及黏性-超弹四种材料模型,借助 ANSYS 软件对聚酯膜的张幅过程进行有限元模拟.计算结果表明由黏性-超弹模型得到的弯曲畸变与试验数据吻合度较高,说明该材料模型能够较准确地反映聚酯膜在双向拉伸过程中的力学响应行为.
Abstract:
When preparing biaxially oriented polyethylene terephthalate(BOPET)films through sequential biaxial stretching,bowing distortion occurs within the film plane,leading to inhomogeneous optical and mechanical properties between the edge and central regions of the films.This quality degradation renders the films unsuitable for optical applications.Considering that polyethylene terephthalate(PET)macromolecules are in a rubbery state and have crystalline physical crosslinking points when the film is stretched above its glass transition temperature Tg but below the melting point Tm,this study establishes a visco-hyperelastic model.The model parameters are obtained by numerically fitting the experimental results of uniaxial stretching and stress relaxation tests.These fittings yield the second-order coefficient of the Mooney-Rivlin polynomial(describing hyperelasticity)and the third-order coefficient of the Prony series(describing viscosity).Then,ANSYS finite element simulations of the tentering process of PET films are carried out with the isotropic elastic,the orthotropic elastic,the plastic,and the visco-hyperelastic material models,respectively.The simulated bowing distortion obtained from the visco-hyperelastic model shows better agreement with experimental results,demonstrating that this model can accurately capture the mechanical response behavior of PET films during biaxial stretching.