军事知识服务平台
基于蚁群算法的多层串联微穿孔板优化
摘要 为解决交通高频噪声污染日益突出的问题,针对单层微穿孔板吸声频带较窄的局限性,本研究对多层微穿孔板吸声结构进行了系统研究.首先,基于马大猷微穿孔板理论,分别采用声电类比法和传递矩阵法推导了多层结构的理论吸声模型.其次,通过 COMSOL 仿真对比了两种方法的吸声系数曲线,验证了传递矩阵法在多层结构中的计算优越性.最后,引入蚁群算法对多层串联微穿孔板的结构参数进行优化,以拓展其吸声频带,适应交通高频噪声频段.结果表明,传递矩阵法在预测多层微穿孔板吸声特性方面优于声电类比法,经参数优化后的结构在100~4 000 Hz 的吸声性能显著提升,且吸声效果随层数的增加而增强.本研究有望为宽频交通噪声控制提供有效的理论依据与设计参考.
Abstract:
To address the increasingly prominent issue of high-frequency traffic noise pollution and to overcome the limitation of narrow sound absorption bandwidth of single-layer micro-perforated panels(MPPs),this study presents a systematic investigation into the sound-absorbing structure of multi-layer series MPPs.First,based on Ma's MPP theory,theoretical sound absorption models for multi-layer structures were derived by using both the acoustic-electrical analogy method and the transfer matrix method.Then,the sound absorption coefficient curves of both methods were compared through COMSOL simulations,confirming the superiority of the transfer matrix method in the analysis of multi-layer structures.Finally,ant colony algorithm(ACA)was introduced to optimize the structural parameters of the multi-layer series MPPs,aiming to broaden the sound absorption bandwidth to match the high-frequency traffic noise spectrum.The results demonstrate that the transfer matrix method outperforms the acoustic-electrical analogy method in predicting the sound absorption characteristics of multi-layer series MPPs.Furthermore,the optimized structure exhibits significantly improved sound absorption performance in the frequency range of 100-4 000 Hz,with MPPs'effectiveness increasing with the number of layers.This study would provide a valuable theoretical foundation and practical design references for broad-frequency traffic noise control.
年,卷(期): 2026, 43(4)
分类号: TB535
机标分类号: TB535 TU112.4 U661.44
在线出版日期: 2026年9月20日