基于中性点阻尼与零序电流相位变化关系的高阻接地保护方法
High Resistance Grounding Protection Method Based on Relationship Between Neutral Point Damping and Phase Variation of Zero Sequence Current
摘要
光伏作为典型的逆变型分布式电源并网规模不断增大,对小电阻接地配电网接地故障特性带来深刻影响.由于高阻接地故障时信号微弱不易辨识,传统零序过电流保护在高阻接地情况下容易拒动,仅靠降低整定值又会导致金属性接地故障时健全馈线保护误动.为了解决高阻接地故障传统零序过电流保护拒动的问题,利用并联小电阻投入前后,故障线路和健全线路零序电流分别与中性点零序电流之间相位差变化量的差异进行故障辨识,提出一种改变中性点小电阻的高阻接地故障保护方法,该方法耐受过渡电阻能力强.首先分析了含逆变型分布式电源(IIDG)小电阻接地配电网单相接地故障零序电流特征,然后基于故障线路、健全线路和中性点零序电流的故障特性,对高阻接地故障进行辨识,提出了基于改变中性点小电阻的高阻接地保护方案.最后在PSCAD中搭建了含IIDG的小电阻接地配电网模型进行仿真,验证了所提方法的有效性.
Photovoltaic(PV)is a typical inverter type distributed power supply with increasing grid-connected scale,which has a profound impact on the ground fault characteristics of small resistance ground distribution network.Because the signal is weak and difficult to identify when the high resistance ground fault occurs,the traditional zero sequence overcurrent protection is easy to reject in the case of high resistance ground fault,and only reducing the setting value will cause the sound feeder protection to misoperate when the metal ground fault occurs.In order to solve the problem of traditional zero sequence overcurrent protection for high resistance ground fault,a method of high resistance ground fault protection by changing the small neutral resistance was proposed by using the difference in phase difference between the zero-sequence current of the faulty line and the zero-sequence current at the neutral point before and after the parallel small resistor is put into operation.This method has a strong ability to withstand transition resistance.Firstly,the zero sequence current characteristics of single-phase grounding fault in distribution network with inverter interfaced distributed generators(IIDG)small resistance were analyzed,and then the high resistance grounding fault was identified based on the fault characteristics of faulty line,healthy line and zero sequence current at neutral point.Finally,a small resistance ground distribution network model with IIDG was built in PSCAD for simulation,and the effectiveness of the proposed method was verified.
年,卷(期):
2026, 56(10)
分类号:
TM28
机标分类号:
TM711
U224.2+6
TM46
在线出版日期:
2026年10月28日
基金项目:
5217C0240003:河南省电力公司科技项目,