10 kA氮冷高温超导电流引线优化分析
Optimization analysis of 10 kA nitrogen-cooled HTS current leads
摘要
高温超导电流引线作为大电流超导磁体的能量供给接口部件,其结构参数优化和材料属性选择对引线漏热性能有显著影响.为减少流向磁体漏热并降低运行成本,本文引线采用液氮-氮气热交换冷却结构.基于数值计算方法对引线结构参数进行优化,并对不同工况下引线稳态温度分布、漏热情况、载流性能等关键指标求解分析,同时结合有限元仿真进行对比验证.针对超导段,综合考虑了超导带材和分流器非线性热物性,对分流器结构参数和漏热进行计算.结果表明,换热器段数值求解和有限元分析结果误差在1%~4%,优化后超导段漏热为5.75 W,引线结构能够有效满足稳态运行时超导磁体漏热要求.
As the energy supply interface for high-current superconducting magnets,the heat leak performance of high-temperature superconducting(HTS)current leads is significantly dictated by their structural parameters and material selection.To minimize heat leakage and operating costs,this paper adopts a liquid nitrogen-nitrogen gas heat exchange cooling structure.Based on numerical methods,the lead's structural parameters are optimized,and key indicators,including steady-state tempera-ture distribution,heat leakage,and current-carrying capacity,are analyzed and validated through finite element simulations.For the superconducting section,the nonlinear thermal properties of the HTS tapes and shunts are integrated into the calculation of the shunt structural parameters and heat loads.Results show that the numerical and simulation results for the heat exchanger(HEX)section agree well within an error of 1%~4%.The optimized heat leakage of the superconducting section is 5.75 W,effectively meeting the requirements for superconducting magnets during steady-state operation.
年,卷(期):
2026, 54(7)
分类号:
TM26
机标分类号:
U467.14
TP391.9
TU391
在线出版日期:
2026年8月20日
基金项目:
2022YFE03150204:国家重点研发计划,