军事知识服务平台
快充下锂电池浸没式热调控研究
Research on immersion thermal regulation of lithium batteries under fast charging
摘要 针对快充时动力电池温度过高、温差大的问题,本文设计了一种导流孔与扰流板相结合的浸没式冷却结构.通过仿真研究,探究了扰流板形状、高度以及厚度对电池模组散热性能的影响.结果表明:矩形扰流板结构相较于圆形、三角形和正六边形结构最大温度降低了 0.98~2.44 ℃,最大温差降低了 0.1~0.16℃;扰流板高度增加热场温度先减小后增加,最佳高度为50 mm;而厚度相反,最佳厚度为2.5 mm;本次研究电池模组最高温度与温差分别为34.04℃、1.27℃,为后续研究浸没式冷却结构提供了借鉴.
Abstract:
To address the issues of high temperature and large temperature differences in power batteries during fast char-ging,this paper proposes an immersion cooling structure combining flow-guiding holes with baffles.Through simulation studies,the effects of baffle shape,height,and thickness on the heat dissipation performance of battery modules were investigated.Re-sults show that compared to circular,triangular,and regular hexagonal baffles,the rectangular baffle structure reduces the maxi-mum temperature by 0.98~2.44 ℃ and the maximum temperature difference by 0.1~0.16 ℃ As baffle height increases,the thermal field temperature initially decreases and then rises,with an optimal height of 50 mm;conversely,increasing baffle thick-ness leads to a decrease in temperature,with an optimal thickness of 2.5 mm.The highest temperature and temperature differ-ence achieved for the battery module in this study were 34.04 ℃ and 1.27 ℃,respectively,providing valuable reference for fu-ture research on immersion cooling structures.
刊 名 低温与超导 PKU
年,卷(期): 2026, 54(7)
分类号: TM912 TK124
机标分类号: TM912.9 O641.4 S917
在线出版日期: 2026年8月20日
基金项目: 52472381:国家自然科学基金52206267:国家自然科学基金,