Seismic Performance of Circular Concrete-filled Steel Tube Columns under Combined Loading Conditions
摘要
为研究圆钢管混凝土柱分别在弯剪扭、压弯剪扭荷载作用下的抗震性能,利用 Stewart 空间三向六自由度加载平台,进行了2 个普通圆钢管混凝土柱和2 个双层钢管混凝土柱试件在复合受力状态下的拟静力往复加载试验.对比分析了弯剪扭、压弯剪扭作用下,各试件的承载力、延性、滞回特性、耗能、刚度退化以及外钢管各位置的峰值应变分布特征.在此基础上,建立了弹塑性有限元分析模型,对比分析了在压弯剪扭荷载作用下,长细比、径厚比对圆钢管混凝土柱抗震性能的影响.结果表明:与普通圆钢管混凝土柱相比,双层圆钢管混凝土柱在弯剪扭和压弯剪扭受力状态下承载力略高,刚度提升不明显,延性系数和变形能力差别不大,耗能能力略有提升;轴向荷载可以提高圆钢管混凝土柱的承载力、刚度、延性、耗能能力,滞回曲线更加饱满;双层钢管混凝土柱内部钢管的存在使其损伤程度较轻,损伤发展较缓,弹塑性变形能力增强;水平加载位移较小时,外钢管中间高度位置纵向应变较小,柱顶和柱底的纵向应变近似线性分布,符合平截面假定.参数分析结果表明:在压弯剪扭工况下,双层钢管混凝土柱的水平承载力随长细比的增大而显著减小,随内层钢管径厚比的增大而增大.
To investigate the seismic performance of the columns of the circular concrete-filled steel tubes(CFST)sub-jected to the bending-shear-torsion loading and the compression-bending-shear-torsion loading,two conventional CFST columns and two double-skin CFST columns are tested on a self-developed Stewart six-degree-of-freedom loading platform.A comparative analysis of bearing capacity,ductility,hysteretic behavior,energy dissipation,stiffness degradation of the specimens under different loading conditions is performed,and so is the distribution characteristics of the peak strain at various positions of the outer steel tubes of the specimens.Based on experimental results,an elastoplastic finite element analysis model is established to investigate the influence of the slenderness ratio and the diameter-to-thickness ratio on the seismic performance of the CFST subjected to the compression-ben-ding-shear-torsion loading.The results demonstrate that compared with conventional CFST columns,double-skin CFST columns exhibit slightly higher bearing capacity but comparable stiffness under the combined bending-shear-torsion loading and the compression-bending-shear-torsion loading,with similar ductility coefficients and deforma-tion capacity but marginally improved energy dissipation.Axial loading enhances bearing capacity,stiffness,duc-tility,and energy dissipation of CFST columns while producing fuller hysteretic curves.The inner steel tube in double-skin columns mitigates damage progression and enhances elastoplastic deformation capacity.On condition that the horizontal displacement is small,longitudinal strains at mid-height of the outer steel tubes remain minimal,while strain distributions near column ends maintain approximately linear patterns consistent with plane-section as-sumption.Parameter analysis reveals that under compression-bending-shear-torsion loading,the horizontal bearing capacity of double-skin CFST columns decreases significantly with increasing slenderness ratio but improves with the increasing of the diameter-to-thickness ratio of the inner tube.