热注入法制备NiOx纳米晶及其在红光QLED空穴注入层中的应用
Hot-injection Synthesis of NiOx Nanoparticles for Hole Injection Layer in Red QLED
摘要
NiOx 作为量子点发光二极管(QLED)中备受关注的无机空穴注入层(HIL)材料,其现有制备方法仍面临成本高、工艺复杂等挑战.本文采用热注入法合成了单分散、高结晶性的NiOx 纳米晶(平均粒径~5.5 nm),该方法兼具溶液法低成本与无需高温退火优势.进一步在NiOx HIL与空穴传输层界面引入(2-(9H-咔唑-9-基)乙基)膦酸2PACz分子层,有效抑制了溶剂侵蚀并将表面羟基缺陷浓度降低6.3%.基于该复合HIL制备的红光QLED,启亮电压由6.1 V降至5.8 V,外量子效率由5.24%提升至7.34%,且寿命相较提升了73%.本研究为全无机QLED提供了一种简便、低成本的NiOx基HIL制备新方案.
NiOx has attracted considerable attention as an inorganic hole injection layer(HIL)material for quan-tum-dot light-emitting diode(QLED).Nevertheless,its synthesis is still limited by high cost and cumbersome fabri-cation procedures.In this work,we synthesize monodisperse,highly crystalline NiOx nanoparticles(average size~5.5 nm)via a hot-injection method,which combines the low-cost advantage of solution processing with the elimina-tion of high-temperature annealing.Furthermore,we introduce a(2-(9H-Carbazol-9-yl)ethyl)phosphonic acid(2PACz)molecular layer at the interface between the NiOx HIL and the hole transport layer.Such interfacial modifi-cation effectively suppresses solvent corrosion and reduces surface hydroxyl defect density by 6.3%.Red QLED in-corporating this hybrid HIL exhibits a decrease in turn-on voltage from 6.1 V to 5.8 V,along with an enhancement in external quantum efficiency from 5.24%to 7.34%.Moreover,the operational lifetime is enhanced by 73%com-pared with the reference device.This study provides a facile and low-cost approach for fabricating NiOx-based HIL for all-inorganic QLED.
年,卷(期):
2026, 47(10)
分类号:
TN312.8
O482.31
机标分类号:
TN312.8
TB383
O614.612
在线出版日期:
2026年11月9日