基于热-位移耦合与CEL的环形聚能射流切割钢管数值模拟
Simulation of steel pipe cutting by using annular shaped charge jet based on coupled temperature-displacement and CEL
摘要
为了向相关工程提供可研阶段的决策依据、促进聚能射流研究,基于热-位移耦合与欧拉-拉格朗日耦合(Coupled Eulerian-Lagrangian,CEL)方法,发展了一套聚能射流切割钢管三维精细化数值模拟方法.采用该模拟方法,对比研究了钢管内无水和不同水压工况(1.5、10 MPa)下的钢管响应,包括整体模型的损伤耗散能、钢管切口处应力,从系统能量和切口两侧单元应力角度揭示了不同水压对切割难易程度的影响.计算结果显示:基于热-位移耦合的数值模拟方法可有效反映钢管温度变化;射流切割钢管过程的损伤耗散能呈先升高后衰减趋势,零水压工况的峰值损伤耗散能明显高于含水工况,这一差异源自钢管切口处损伤程度的差异,无水情况下钢管更易切割成功;切口两侧单元的Mises应力呈现出"迅速升高-平稳-急剧下降-恢复-平稳"特点,无水压工况下应力降低程度明显大于其他工况;随水压提高,急剧下降段最小值逐渐降低.研究成果有助于进一步深化对聚能射流切割钢管细观现象及内在机理的认识,可在一定程度上为相关工程提供参考、为相关研究提供借鉴.
To provide a decision-making basis for relevant projects during the feasibility study stage and to advance research on shaped charge jetting,a three-dimensional refined numerical simulation method for shaped charge jet cutting of steel pipes was developed based on the Coupled temperature-displacement and Coupled Eulerian-Lagrangian(CEL)method.Using this simulation method,a comparative study was conducted on the response of steel pipes under dry conditions and different water pressures,including the damage dissipation energy of the overall model and the stress at the pipe incision.The influence of different water pressures on the difficulty of cutting was revealed from the perspectives of system energy and the stress of the elements on both sides of the incision.The calculation results show that:The numerical simulation method based on Coupled temperature-displacement can effectively reflect the temperature changes in the steel pipe;The damage dissipation energy curve during the jet cutting process exhibits an initial increase followed by a decay trend.The peak damage dissipation energy under the dry condition is significantly higher than that under water-filled conditions,a difference stemming from the varying degrees of damage at the pipe incision.Steel pipes are more easily cut successfully under dry conditions;The Mises stress curve of the elements on both sides of the incision demonstrates a pattern of rapid increase-steady-sharp decline-recovery-steady.The extent of stress reduction under the dry condition is significantly greater than that under other conditions.As water pressure increases,the minimum value during the sharp decline segment gradually decreases.The research findings contribute to a deeper understanding of the mesoscopic phenomena and intrinsic mechanisms involved in shaped charge jet cutting of steel pipes.To a certain extent,these findings can serve as a reference for relevant engineering applications and provide insights for related research.
年,卷(期):
2026, 32(4)
分类号:
TJ55
TD235.3
机标分类号:
TV642.3
TQ028.1
TK72
在线出版日期:
2026年9月9日
基金项目:
51908236:国家自然科学基金,