Optimal Vector Predictive Sliding Mode Control for Vienna Rectifier in Wide Varia-ble-frequency Aviation Application
摘要
当 Vienna 整流器应用于航空供电系统有源前端时,传统 PI 控制受交流输入频率宽频波动(360~800 Hz)的影响,导致网侧电流质量差及功率因数下降.为此,该文提出一种适用于宽变频工况的Vienna整流器最优矢量预测滑模控制(optimal vector predictive sliding mode control,OVP-SMC)方法.首先,内环基于瞬时功率理论构建预测功率模型,无须代价函数,并结合瞬时锁相环(phase-locked loop,PLL)实时生成最优开关矢量,实现宽输入频率内功率跟踪误差最小化.其次,外环采用比例积分滑模控制,引入包含电压误差信号的变指数幂次趋近律,动态调节输出电压.最后,通过仿真和实验将所提方法与传统方法比较,结果表明:在整个宽输入频域内,所提方法具有更好的动稳态性能,网侧电流总谐波畸变率低于3%,系统功率因数保持在0.99以上.
When the Vienna rectifier is applied as an active front-end in aircraft power supply systems,traditional PI control is adversely affected by the wide frequency variation(360~800 Hz)of AC input,leading to poor grid-side current quality and a reduction in power factor.To address this issue,this paper proposes an optimal vector predictive sliding mode control(OVP-SMC)method for Vienna rectifiers,specifically designed for wide frequency variation operating con-ditions.A predictive power model is constructed for the inner loop based on instantaneous power theory,the cost function of traditional predictive control is eliminated,and an instantaneous phase-locked loop(PLL)is integrated to gen-erate optimal switching vectors in real-time,achieving minimized power tracking errors across the wide input frequency range.The proportional-integral sliding mode control is adopted for the outer loop featuring a variable-exponential-power reaching law containing voltage error signals,accompanied by its parameter design methodology to dynamically regulate output voltage.Finally,the proposed method is compared with traditional method through simulations and experiments,and the results demonstrate that,across the entire wide input frequency range,the proposed method exhibits superior dy-namic and steady-state performance.The grid-side current total harmonic distortion(THD)remains below 3%,and the system power factor is maintained above 0.99.