军事知识服务平台
氧化铝陶瓷表面微结构设计提升真空沿面闪络电压
Surface Microstructural Design of Alumina Ceramics to Enhance Vacuum Surface Flashover Voltage
摘要 氧化铝陶瓷以其优异的电气与机械性能被用为高压真空灭弧室的外壳,承担绝缘、支撑及真空隔绝等重要功能.然而,真空灭弧室内部的陶瓷沿面闪络问题严重影响其绝缘性能.目前主要采用增长陶瓷长度的方法以提升真空灭弧室内陶瓷的绝缘性能,但这会导致真空灭弧室体积增大、成本上升等问题.因此,提高单位长度陶瓷在真空环境中的沿面闪络电压,对于缩减真空灭弧室尺寸、降低成本及提升可靠性具有重要意义.采用在氧化铝陶瓷表面刻蚀周期性三角形凹槽的方法提升其真空沿面闪络电压,系统研究了刻槽周期(100~400 μm)对陶瓷在直流电压下真空沿面闪络电压的影响规律.此外,基于网格质点法-蒙特卡罗法(particle-in-cell-Monte Carlo collision,PIC-MCC)算法建立了陶瓷真空沿面闪络仿真模型,并结合实验分析表面刻槽对陶瓷真空沿面闪络的抑制作用及机制.研究表明,表面微结构设计在提升陶瓷真空沿面闪络电压方面具有良好的应用潜力,其中刻槽周期为 100 μm的陶瓷与未刻槽陶瓷相比,其50%闪络电压由26.37 kV 提升至 40.18 kV,提升幅度达52%,为真空灭弧室陶瓷外壳结构的优化提供了新思路.
Abstract:
Alumina ceramics,owing to their excellent electrical and mechanical properties,are widely employed as en-closure materials in high-voltage vacuum interrupters,where they serve critical roles in insulation,structural support,and vacuum sealing.However,surface flashover along ceramic surfaces inside the interrupter significantly degrades insulation performance.At present,the predominant strategy to enhance ceramic insulation is to increase its length,which unfortu-nately leads to larger interrupter dimensions and higher production costs.Therefore,improving the surface flashover voltage per unit length under vacuum conditions is essential for reducing device size and cost while enhancing operational reliability.We put forward a novel approach involving the fabrication of periodically etched triangular grooves on alumina ceramic surfaces to enhance vacuum surface flashover voltage.A systematic investigation was conducted to evaluate the influence of groove periodicity(ranging from 100 μm to 400 μm)under direct current(DC)voltage.Furthermore,a sim-ulation model based on the particle-in-cell with Monte Carlo collision(PIC-MCC)algorithm was developed to explore the flashover mechanism,and experimental results were used to validate the suppressive effect of the micro-grooved structure.The findings reveal that surface microstructuring can effectively enhance flashover performance.Specifically,for the sample with a groove period of 100 μm,the 50%flashover voltage increased from 26.37 kV(ungrooved)to 40.18 kV,representing an improvement of 52%,which offering a promising direction for the structural optimization of ceramic enclosures in vacuum interrupters.
刊 名 高电压技术 ISTICEIPKU
年,卷(期): 2026, 52(9)
机标分类号: TM561 TP391.41 TS2
在线出版日期: 2026年10月22日