高频方波电压下温度对高频变压器绝缘浇注界面放电的影响机制
Influence Mechanism of Temperature on Discharge at the Insulation Potting Interface of High-frequency Transformers Under High-frequency Square-wave Voltage
摘要
为揭示高频方波电压下温度对环氧树脂-聚酰亚胺浇注界面放电劣化的影响机制,基于实际工况下浇注工艺构建复合绝缘界面模型,结合硅光电倍增管与 UHF搭建浇注界面放电测试平台,开展高频方波电压下不同温度下环氧树脂-聚酰亚胺复合绝缘浇注界面的界面放电特性研究.结果表明:温度由25℃升至 150℃时,界面放电起始电压降幅26.98%,最大放电幅值增加了1.78 倍,平均放电幅值由203.4 mV 升至 546.7 mV,总放电频次增加了 172.4%,且温升导致放电相位显著后移;进一步根据浇注界面脱粘作用分析温度对浇注界面放电特性的影响机理,阐明了温升通过加速界面电荷弛豫与调控残余电荷空间分布的协同作用,影响气腔内部电场,导致放电次数和幅值增加、放电相位后移.该研究成果为高频变压器绝缘材料热力学参数匹配、浇注工艺缺陷控制及运行温度阈值设定提供了一定的理论依据.
In order to reveal the influence mechanism of temperature on the discharge degradation of epoxy-polyimide casting interface under high-frequency square-wave voltage,we construct a composite insulation interface model based on the actual working condition of Potting process,and build a test platform of casting interface discharge by combining the silicon photomultiplier tube and UHF to study the interface discharge characteristics of casting interface of epoxy-polyimide composite insulation under different temperatures and high-frequency square-wave voltage.The results show that,when the temperature rises from 25℃to 150℃,the onset voltage of interfacial discharge decreases by 26.98%,the maximum discharge amplitude increases by 1.78 times,the average discharge amplitude rises from 203.4 mV to 546.7 mV,and the total discharge frequency increases by 172.4%;meanwhile,the temperature rise leads to a significant backward shift of the discharge phase.The mechanism of temperature influence on the discharge characteristics of casting interface is further analyzed according to the debonding effect of the interface,and it is clarified that the temperature rise affects the electric field inside the void through the synergistic effect of accelerating the interfacial charge relaxation and regulating the spatial distribution of the residual charge,leading to the increase of the number of discharges and the am-plitude,and the backward shift of the phase of the discharges.The research results provide a certain theoretical basis for the matching of thermodynamic parameters of high-frequency transformer insulating materials,the control of defects in the casting process and the setting of operating temperature threshold.
年,卷(期):
2026, 52(9)
机标分类号:
TM855
TM213
TQ323.5
在线出版日期:
2026年10月22日