预制龙门吊基础的设计计算应用技术研究
Design Calculation and Construction Application Technology of Prefabricated Gantry Crane Foundations
摘要
为解决传统现浇龙门吊基础施工繁琐、回收困难以及现有预制基础在拼接端部易产生地基应力集中的问题,针对一种新型装配式预制基础,建立了基于截面突变的 Winkler 弹性地基梁力学模型.通过分析第一预制基础在集中力作用下的剪力分配与变形协调机制,引入刚度影响函数,推导了地基最大应力的简易计算公式.理论分析表明,叠加弯矩影响后的跨内最大挠度不超过仅计入剪力影响时端部挠度的 0.6 倍,证实了以剪力为主导的简化公式具有安全性.结合重庆渝武高速公路工程实例,通过 MIDAS/Civil 有限元模型进行对比验证.结果显示,简化公式计算的地基应力值(150.8 kPa)与有限元数值模拟结果(133.3 kPa)吻合较好且略有安全冗余,可用于工程现场对预制基础尺寸的快速核算与设计.
To address the issues of cumbersome construction and difficult recovery of traditional cast-in-place gantry crane foundations,as well as the stress concentration at splicing joints in existing prefabricated foundations,a novel prefabricated assembly-type foundation is proposed.A mechanical model of the Winkler elastic foundation beam based on cross-sectional mutations is established.By analyzing the shear distribution and deformation coordination mechanism of the first prefabricated foundation under concentrated loads,a stiffness influence function is introduced to derive a simplified calculation formula for the maximum foundation stress.Theoretical analysis demonstrates that the maximum mid-span deflection,accounting for superimposed bending moments,does not exceed 0.6 times the deflection at the end when only shear effects are considered,confirming the safety of the simplified formula dominated by shear.Combined with an engineering case study from the Chongqing Yu-Wu Expressway,comparative verification is conducted using MIDAS/Civil finite element modeling.The results show good agreement between the foundation stress calculated by the simplified formula(150.8 kPa)and the finite element simulation results(133.3 kPa),with slight safety redundancy.The proposed method can be applied to rapid on-site dimension checking and design of prefabricated foundations.
年,卷(期):
2026, 71(9)
分类号:
U445.32
机标分类号:
TP317.1
U443.22
TU441.4
在线出版日期:
2026年10月14日