军事知识服务平台
不同层理倾角页岩力学特性及本构模型
Mechanical Properties and Constitutive Models of Shale with Different Bedding Angles
摘要 在山地隧道开挖过程中,层状岩石的力学特性对工程安全至关重要.以宁夏贺兰山隧道页岩为研究对象,通过室内试验与理论分析,探究其强度准则及参数确定方法.首先,对不同层理倾角的试样开展不同围压下的单轴与三轴压缩试验,系统分析页岩的强度特性与破坏模式.其次,基于试验对比分析,构建适用于页岩的横观各向同性弹塑性本构模型,并实现该模型的数值计算.最后,通过对比数值计算结果与三轴试验数据,验证所建立模型的可靠性.试验结果表明:围压升高增大了峰值强度与塑性变形;层理倾角对强度的影响呈非线性,可通过黏聚力 c 和内摩擦角φ加以量化.所构建的本构模型经数值求解后,计算结果与试验结果吻合较好,验证了模型的有效性.
Abstract:
During the excavation of mountain tunnels,the mechanical properties of layered rocks are crucial to engineering safety.Taking the shale of the Helan Mountain Tunnel in Ningxia as the research object,t its strength criterion and parameter determination methods are studied through laboratory tests and theoretical analysis.First,uniaxial and triaxial compression tests under different confining pressures are conducted on specimens with various bedding dip angles to systematically analyze the strength characteristics and failure modes of the shale.Second,based on comparative analysis of the experimental results,a transversely isotropic elastoplastic constitutive model suitable for shale is developed,and numerical implementation of the model is achieved.Finally,the reliability of the established model is verified by comparing the numerical simulation results with the triaxial test data.The experimental results indicate that increasing confining pressure enhances both peak strength and plastic deformation,and the influence of bedding dip angle on strength is nonlinear and can be quantified by cohesion c and internal friction angle φ.The numerical solutions obtained from the proposed constitutive model show good agreement with the experimental results,confirming the validity of the model.
刊 名 公路 ISTICPKU
年,卷(期): 2026, 71(9)
分类号: U451.2
机标分类号: TU452 U441 O343
在线出版日期: 2026年10月14日
基金项目: DQJ-2023-A07:中国铁建大桥工程局集团有限公司科技创新项目,