Optimization Control Method for Thermal System of 2×660 MW Coal Fired Boiler Based on BIM Model
摘要
燃煤锅炉热力系统控制过程中,离散时刻锅炉热效率值存在的数据偏差或控制延迟的问题,易导致监测数据质量不高、不满足理想温度控制需求(主蒸汽温度波动较大).为此,以某 2×660 MW 燃煤锅炉为研究对象,提出了基于 BIM模型的锅炉热力系统寻优控制方法.通过倾斜摄影方法,建立了包含 BIM端和 Web 端 2 个部分的燃煤锅炉 BIM模型,获取高质量的燃煤锅炉实时运行数据.结合多项监测数据的计算,分析当前燃煤锅炉热效率变化状态,进而根据锅炉热力系统的热特性,从实时运行数据中寻优得到最佳风煤比控制量;应用增量式 PID 控制器进行跟踪控制,以实现对燃煤锅炉热力系统的寻优控制.实践测试表明:该方法控制下的燃煤锅炉主蒸汽温度的波动幅度减小,能够稳定在理想温度±5℃范围之内,控制性能较优,具有广泛的推广应用前景.
During the control process of the thermal system of a coal-fired boiler,data deviations or control delays in the boiler thermal efficiency values at discrete time instants tend to cause low-quality monitoring data and fail to meet the requirements for ideal temperature control(resulting in large fluctuations in the main steam temperature).To address these issues,a 2×660 MW coal-fired boiler is taken as the research object,and an optimization control method for the boiler thermal system based on a Building Information Modeling(BIM)is proposed.Through oblique photogrammetry,a BIM model of the coal-fired boiler is established,consisting of both a BIM end and a Web end,to obtain high-quality real-time operating data of the boiler.By calculating multiple monitoring parameters,the current variation trend of boiler thermal efficiency is analyzed.Then,based on the thermal characteristics of the boiler thermal system,the optimal air-to-coal ratio control quantity is obtained through optimization from the real-time operating data.An incremental PID controller is applied for tracking control,thereby achieving optimal control of the thermal system of the coal-fired boiler.Practical tests show that under this control method,the fluctuation range of the main steam temperature is reduced and can be stabilized within±5℃of the ideal temperature,demonstrating superior control performance and promising broad prospects for popularization and application.