军事知识服务平台
燃煤和垃圾电厂锅炉协同处置污泥技术应用介绍
Research on the Application of Sludge Co-Processing Technology in Coal-Fired and Waste-to-Energy Plant Boilers
摘要 为了彻底解决城镇污水处理厂污泥出路问题,燃煤和垃圾电厂锅炉协同处置城镇污水处理厂污泥已经成为一个重要的方式.根据国内外案例经验,协同处置时需将污泥含水率降至 40%以下.因此,污泥脱水干化处理已成为实现污泥减量化、无害化和资源化的关键环节.低温带式干化和间接热干化工艺作为成熟的技术,在国内外案例众多,有各自的应用场景.低温干化技术凭借热泵技术的应用,在能耗上有较为明显的优势,而且无外加热源的限制,可在任何污水处理厂进行就地干化.在无蒸汽等外加热源、小规模污泥干化等场景具有较大的优势.间接热干化技术运行稳定可靠,占地面积小,在有蒸汽等余热的场景下具有一定的竞争力,由于单机规模更大,在大规模污泥干化上有较大的优势.对于 2 种主流的干化技术,对直接运行成本影响占比最大的均为干化的热源,分别为电能和蒸汽,如果能利用成本较低的热源,可大幅度降低污泥干化的成本.干化后污泥对不同类型锅炉适应性差异较大,需根据锅炉类型控制掺烧比例,一般不超过 5%,同时需关注飞灰、灰熔点及污染物等问题,避免协同处置污泥对燃煤和垃圾电厂锅炉带来不利影响.
Abstract:
To thoroughly address the disposal issue of sludge from municipal wastewater treatment plants,the co-processing of sludge in coal-fired and waste-to-energy power plant boilers has become an important approach.Based on domestic and international case studies,co-processing requires reducing the sludge moisture content to below 40%,making sludge dewatering and drying a critical step for achieving sludge reduction,harmless treatment,and resource recovery.As mature technologies,low-temperature belt drying and indirect thermal drying processes have numerous applications both domestically and internationally,each with its own suitable scenarios.Low-temperature drying technology,leveraging heat pump applications,offers significant advantages in energy consumption and is not limited by external heat sources,allowing for on-site drying at any wastewater treatment plant.It holds considerable advantages in scenarios lacking external heat sources such as steam and for small-scale sludge drying.Indirect thermal drying technology operates stably and reliably,occupies a small footprint,and remains competitive in scenarios where waste heat such as steam is available.Due to its larger single-unit capacity,it offers greater advantages for large-scale sludge drying.For both mainstream drying technologies,the heat source for drying—electricity and steam,respectively—has the greatest impact on direct operating costs.Utilizing lower-cost heat sources can significantly reduce the cost of sludge drying.Dried sludge exhibits varying adaptability to different types of boilers,and the blending ratio must be controlled according to the boiler type,generally not exceeding 5%.At the same time,attention must be paid to issues such as fly ash,ash fusion point,and pollutants to avoid adverse effects on coal-fired and waste-to-energy power plant boilers from co-processing sludge.
刊 名 锅炉技术 PKU
年,卷(期): 2026, 57(5)
分类号: X705
机标分类号: X703.1 U214 TS199
在线出版日期: 2026年10月23日
基金项目: 23230730600:上海市科技计划项目2022-002-001:上海市住建委科研项目,