Research on Contact Stress Analysis of Spherical Hinges in Swivel Construction of Large-Tonnage Bridges
摘要
为研究大吨位转体桥梁核心构件在对称与非对称荷载作用下的接触应力计算及分布规律,采用工程常用算法、半空间体接触理论、半平面体接触理论及有限元数值模拟,依托实际工程对球铰接触应力分布规律及不同计算方法的适用性进行对比分析.结果表明:1)半空间体接触应力计算结果与有限元模拟分布规律一致,均呈离球铰圆心越远,接触应力越大,半空间体接触应力计算方法可适用于球铰接触应力的求解;2)基于半空间体理论推导的非对称荷载下球铰接触应力计算公式,其计算结果与有限元计算结果分布规律一致,表现为中心低、边缘高,且偏心侧应力整体增加,计算误差较小,具备良好的工程适用性,可为工程设计提供参考.
To investigate the calculation and distribution patterns of contact stresses in the core components of large-tonnage bridge swivel systems under both symmetric and asymmetric loads,this study employs conventional engineering algorithms,half-space contact theory,half-plane contact theory,and finite element numerical simulation.Based on an actual engineering project,a comparative analysis is carried out on the contact stress distribution of the spherical hinge and the applicability of the various computational methods.The results indicate that:1)The contact stresses computed by the half-space theory are in good agreement with the finite element simulation results in terms of distribution trend,both revealing that the contact stress increases with radial distance from the centre of the spherical hinge.The half-space contact stress calculation method is proven to be applicable for solving the contact stresses of spherical hinges;2)The formula for the contact stress of the spherical hinge under asymmetric loads,derived from the half-space theory,yields distribution patterns that are consistent with those obtained from finite element analysis,characterised by low stress at the centre,high stress at the edge,and an overall increase on the eccentric side.The computational error is relatively small,demonstrating satisfactory engineering applicability and providing a valuable reference for engineering design.