Experimental study on bond-slip behavior between rebar and concrete under lateral pressure
摘要
[目标]为探明侧向压力作用下钢筋与混凝土间黏结滑移本构关系,针对其在双向应力状态下的力学性能开展试验研究.[方法]首先,设计可施加侧向压力的加载装置,对 14 组共 28 个钢筋混凝土试件进行单调与循环加载试验.然后,研究主要变参(侧向压力、钢筋直径及保护层厚度)对试件破坏模式、黏结强度、峰值滑移及峰后黏结能等性能指标的影响规律.最后,基于试验数据与理论分析,结合劈裂破坏机理与 Tepfers 厚壁圆筒模型,引入考虑侧向压力影响的修正系数,提出适用于侧向压力作用的钢筋混凝土黏结滑移本构模型.[结果]随侧向压力增大,试件的劈裂黏结强度先减小后增大,峰后黏结能显著增大;裂缝形态由沿钢筋径向逐渐转变为斜向,最终在较高侧向压力下呈现径向与横向复合裂缝形态;增大钢筋直径导致黏结强度与峰后黏结能下降,而保护层厚度的增加则显著提升黏结强度与峰后黏结能,并延缓黏结应力下降段的出现.[结论]提出的黏结滑移本构模型能够较为准确地表征侧向压力作用下钢筋在混凝土中的拉拔行为.该模型为组合梁桥及其他处于双向受力状态的混凝土桥面板的黏结性能退化分析与耐久性评估提供了理论依据与工程参考.
[Objective]To investigate the bond-slip constitutive relation between rebar and concrete under lateral pressure and reveal their mechanical properties under biaxial stress state,experimental studies were carried out in this study.[Method]A loading device capable of applying lateral pressure was designed,and monotonic and cyclic loading tests were conducted on 14 groups(28 specimens total)of rebar-concrete specimens.The main variable parameters included lateral pressure,rebar diameter,and concrete cover thickness.The influence of these parameters on performance indicators such as specimen failure mode,bond strength,peak slip,and post-peak bond energy was analyzed.Based on experimental data and theoretical analysis,combined with the splitting failure mechanism and Tepfers'thick-walled cylinder model,a correction coefficient considering the effect of lateral pressure was introduced,and a bond-slip constitutive model suitable for rebar-concrete under lateral pressure was proposed.[Result]As lateral pressure increases,the splitting bond strength first decreases and then increases.The post-peak bond energy significantly increases.The crack pattern gradually transforms from the rebar radial direction to an oblique direction.Under high lateral pressure,the concrete finally presents combined radial and transverse cracks.Increasing the rebar diameter decreases both bond strength and post-peak bond energy.Conversely,increasing the concrete cover thickness significantly increases both.It also delays the descending stage of bond stress.[Conclusion]The proposed bond-slip constitutive model accurately characterizes the pull-out behavior of rebar in concrete under lateral pressure.This model provides a theoretical basis and engineering reference for bond performance degradation analysis.It also aids in the durability assessment of composite beam bridges and other concrete bridge decks under a biaxial stress state.