摘要
[目标]多电机分布式驱动系统中,车辆状态的准确估计是四驱控制策略的核心.为解决电动汽车在复杂工况下因车轮滑转或抱死导致的车速估计精度不足、实时性下降的问题,提出一种基于高精度电机转速与车辆加速度的车速估计方法.[方法]该方法通过预识别与判定识别两级机制对车轮打滑和抱死状态进行判别.在预识别阶段,依据轮速与加速度信息计算初步估算车速;在判定识别阶段,结合车轮状态判别结果对估算值进行修正与优化,获得精确的整车车速.[结果]实车验证结果表明,该方法在低速工况及复杂多变工况下均能实现车速的高精度估计,估计误差控制在较小范围内;同时,算法计算量低,满足车辆实时控制对车速信息的时效性要求.[结论]所提方法有效克服了传统车速估计方案在轮速差异较大或传感器失效时的估计失准问题,显著提升了分布式驱动系统车速估计的精度与实时性,为多电机四驱车辆的动力学控制、扭矩分配优化及能量管理策略奠定了关键技术基础,具有良好的工程应用价值.
[Objective]In multi-motor distributed drive systems,accurate vehicle state estimation is fundamental to four-wheel-drive control strategies.To address the problems of insufficient accuracy and reduced real-time performance in vehicle speed estimation caused by wheel slip or wheel lock under complex operating conditions,a vehicle speed estimation method based on high-precision motor rotational speed and vehicle acceleration is proposed.[Method]The proposed method identifies wheel slip and wheel lock conditions through a two-stage mechanism consisting of pre-identification and decision identification.During the pre-identification stage,an initial vehicle speed estimate is obtained using wheel speed and acceleration information.During the decision identification stage,the estimated value is corrected and optimized according to the wheel-state identification results,yielding an accurate vehicle speed estimate.[Result]Real-vehicle validation results demonstrate that the proposed method achieves high-accuracy vehicle speed estimation in both low-speed and complex variable operating conditions,with estimation errors maintained within a small range.In addition,the algorithm requires low computational cost and satisfies the real-time requirements of vehicle control systems for timely speed information.[Conclusion]The proposed method effectively overcomes the estimation inaccuracies of conventional vehicle speed estimation approaches in conditions of significant wheel-speed discrepancies or sensor failures.It significantly improves the accuracy and real-time performance of vehicle speed estimation in distributed drive systems,providing a critical technical foundation for vehicle dynamics control,torque distribution optimization,and energy management strategies in multi-motor four-wheel-drive vehicles,and demonstrating strong engineering application potential.