Studyon the adsorption of methyl orange by modified chitosan/polyvinyl alcohol films
摘要
研究以壳聚糖(CS)和聚乙烯醇(PVA)为基材,通过掺入不同质量分数(0%、4%、6%、8%、10%)的白桦木醋液,制备了系列复合薄膜.采用扫描电子显微镜(SEM)、红外光谱(FT-IR)、力学测试、接触角和X射线衍射(XRD)五种表征手段,系统考察了薄膜的微观结构、力学性能及对甲基橙(MO)的吸附行为.结果显示:白桦木醋液的添加改变了薄膜的微观形貌,并对力学性能产生积极影响.适量添加(4%)可大幅提升CS与PVA薄膜的拉伸强度和断裂伸长率,CS-WV4%和PVA-WV4%的拉伸强度为(22.85±3.87)、(31.25±6.71)MPa;断裂伸长率为(59.70±0.79)%、(485.79±63.39)%.在吸附性能方面,CS-WV6%和PVA-WV4%薄膜分别在甲基橙初始浓度为50、75 mg/L下展现出最高吸附率(94.99%、38.88%)及最高平衡吸附量(4.99 mg/g、3.13 mg/g).CS 薄膜的吸附量表现为 CS-WV6%>CS-WV4%>CS-WV8%>CS-WV10%>CS-WV0%,PVA 薄膜的吸附量表现为 PVA-WV4%>PVA-WV8%>PVA-WV10%>PVA-WV6%>PVA-WV0%.动力学分析表明,其吸附过程符合准二级动力学模型,主导机制为化学吸附.研究为开发高性能、生物基的甲基橙吸附材料提供了重要理论依据.
In this study,a series of composite films were fabricated by incorporating varying mass fractions(0%,4%,6%,8%,and 10%)of birch wood vinegar into chitosan(CS)and polyvinyl alcohol(PVA)matrices.The resulting films were systematically characterized using scanning electron microscopy(SEM),Fourier trans-form infrared spectroscopy(FT-IR),mechanical testing,contact angle analysis,and X-ray diffraction(XRD)to evaluate their microstructural features,mechanical properties,and adsorption performance toward methyl or-ange(MO).The incorporation of birch wood vinegar was found to alter the surface morphology of the films and enhance their mechanical properties.An optimal addition of 4%significantly improved both tensile strength and elongation at break.CS-WV4%exhibited a tensile strength of(22.85±3.87)MPa and an elongation at break of(59.70±0.79)%,while PVA-WV4%achieved values of(31.25±6.71)MPa and(485.79±63.39)%,respec-tively.With respect to adsorption performance,CS-WV6%and PVA-WV4%demonstrated the highest removal efficiency(94.99%and 38.88%)and maximum equilibrium adsorption capacity(4.99 and 3.13 mg/g)at initial MO concentrations of 50 mg/L and 75 mg/L,respectively.The adsorption capacity followed the trend CS-WV6%>CS-WV4%>CS-WV8%>CS-WV10%>CS-WV0%for CS-based films,whereas for PVA-based films,the order was PVA-WV4%>PVA-WV8%>PVA-WV10%>PVA-WV6%>PVA-WV0%.Kinetic anal-ysis revealed that the adsorption process was well described by the pseudo-second-order kinetic model,sugges-ting that chemical adsorption is the rate-limiting step.This work provides valuable theoretical insights for the development of high-performance,bio-based materials for the effective removal of methyl orange from aqueous solutions.