保温时间对TC11/WE43复合材料界面结构及力学性能的影响
Effect of holding time on the microstructure and mechanical properties of TC11 framework reinforced WE43 matrix composites
摘要
研究设计了三维连通结构的TC11(Ti-6.5Al-3.5Mo-1.5Zr-0.3Si)合金框架作为增强体,采用粉末冶金结合无压浸渗技术制备了 WE43基复合材料.微观结构表明,复合材料内部的TC11框架增强体呈现连续均匀地分布,框架内部孔隙区域被WE43基体充分填充,形成了TC11/WE43三维连通的稳定结构.同时,复合材料界面处通过扩散反应形成了纳米尺度的Al2Y过渡层,提升了界面结合强度.力学性能测试结果表明,当保温时间为30 min时,TC11/WE43复合材料展现出最佳的综合力学性能,其屈服强度(YS)、抗拉强度(UTS)和延伸率(EL)分别达到417、438 MPa和6.6%,其强度的提升来源于高仿生结构的TC11框架所起的载荷传递作用以及优异的界面结合强度.
This study designed a three-dimensional interconnected TC11 alloy framework as a rein-forcement and prepared WE43-based composites using powder metallurgy combined with pressureless infiltration technology.Microstructural analysis shows that the TC11 framework reinforcement within the composite is continuously and uniformly distributed,and the pore regions inside the framework are fully filled with the WE43 matrix,forming a stable three-dimensional interpenetrating structure of TC11/WE43.At the same time at the interface of the composite material,a nanoscale Al2Y transitional layer is formed through diffusion reaction,which enhances the interfacial strength.Mechanical perform-ance test results indicate that when the holding time is 30 minutes,the TC11/WE43 composite material exhibits the best overall mechanical properties,with a yield strength(YS),ultimate tensile strength(UTS),and elongation(EL)of 417 MPa,438 MPa,and 6.6%,respectively.The improvement in strength is attributed to the load transfer effect of the highly biomimetic TC11 framework and the excel-lent interfacial bonding strength.
年,卷(期):
2026, 47(4)
分类号:
TF125
TG146.2
机标分类号:
TB331
TG174.44
TG454
在线出版日期:
2026年11月11日
基金项目:
2023A0505050122:广东省国际科技合作项目2020GDASYL-20200101001:广东省科学院建设国内一流研究机构行动专项资金项目2020B0301030006:广东省基础与应用基础研究重大项目,