Microstructure,segregation and oxidation mechanism of AlV55 alloy prepared by aluminothermy
摘要
以五氧化二钒和铝粉为原料,采用铝热法制备AlV55钒铝合金,系统研究了合金锭宏观分层、微观组织、成分分布及杂质行为.结果表明,铝热反应后合金锭呈现明显上下层分化,上层组织疏松、含气孔与氧化铝夹杂、钒含量偏低且波动大;下层组织致密、金属光泽强、钒含量高且均匀.微观上,上层为针状钒铝固溶体,下层为鱼骨状钒铝固溶体.成分偏析源于钒、铝扩散速率差异与密度差耦合作用,上层钒含量约51.76%,下层约58.87%;上层氧、氮、铁、硅杂质显著高于下层.对合金氧化层进行了分析,不同颜色的氧化层对应的V 2p特征峰的光电子结合能EB不同,V价态越高,EB越大.研究揭示了铝热法钒铝合金组织结构非均匀及氧化色成因,为工艺优化与高品质钒铝合金制备提供了理论依据.
Using vanadium pentoxide and aluminum powder as raw materials,AlV55 vanadium-alu-minum alloy was fabricated via the thermite reaction method.The macroscopic stratification,micro-structure,elemental distribution and impurity behavior of the alloy ingot were systematically investig-ated.The results show that distinct upper and lower stratification occurs in the alloy ingot after the thermite reaction.The upper layer features loose microstructure,internal pores and alumina inclusions,with low and highly fluctuating vanadium content.Meanwhile,the lower layer possesses dense micro-structure,strong metallic luster,high and uniformly distributed vanadium content.Microscopically,needle-shaped vanadium-aluminum solid solution is formed in the upper layer,while fishbone-shaped vanadium-aluminum solid solution dominates the lower layer.Composition segregation is caused by the coupled effect of diffusion rate difference and density disparity between vanadium and aluminum.The vanadium content is approximately 51.76 wt%in the upper layer and 58.87 wt%in the lower layer.The contents of impurities including oxygen,nitrogen,iron and silicon in the upper layer are remarkably higher than those in the lower layer.Analysis on the oxide layers of the alloy indicates that the binding energy(EB)of V 2p characteristic peaks varies with different colored oxide layers,and higher vana-dium valence corresponds to larger binding energy.This study reveals the structural inhomogeneity and oxidation coloration mechanism of vanadium-aluminum alloys prepared by thermite reaction,and provides a theoretical basis for process optimization and high-quality fabrication of vanadium-alumin-um alloys.