Differences in microstructure and impurity content among vanadium-aluminum alloys of various grades
摘要
钛合金广泛用于航空航天、汽车制造、医疗等领域,而制备钛合金的关键材料是钒铝合金,研究用铝热法生产钒铝合金,在原料相同的条件下根据不同的物料配比制备出牌号为AlV55、AlV65、AlV85的合金,分析其微观结构、杂质含量以及力学性能.结果表明:AlV55的杂质含量比AlV65、AlV85的低,但是其微观组织存在裂纹、气孔等缺陷,AlV55由Al8V5和钒铝固溶物组成,因其Al8V5的组织结构,其硬度及耐磨性较好;AlV85的杂质含量较高,但是其合金产品一致性较好,AlV85由AlV,组成,致使其硬度小,耐磨性差.通过比较可知AlV65合金产品的性能较为均衡,无论是在杂质含量还是力学性能方面都较为优越.
Titanium alloys are extensively utilized in the aerospace,automotive,and biomedical sectors.Vanadium-aluminum master alloys are key materials for preparing titanium alloys.In this study vana-dium-aluminum master alloys of three grades such as AlV55,AlV65,and AlV85 were synthesized via aluminothermic route under identical raw-material inputs while varying stoichiometric ratios.The res-ulting ingots were characterized with respect to microstructures,impurity inventory,and mechanical re-sponse.The results show that AlV55 exhibits the lowest bulk-impurity level;however,its microstruc-ture contains micro-cracks and gas-induced porosity.Phase analysis reveals Al8V5 intermetallic and a V-rich solid solution,the former conferring elevated hardness and wear resistance.AlV85,although show-ing higher tramp-element contents,displays superior inter-ingot consistency;the sole presence of the AlV3 phase yields reduced hardness and inferior wear performance.AlV65 delivers the most balanced property profile,combining moderate impurity content with advantageous mechanical properties.