军事知识服务平台
碳化物分布对NM500级耐磨钢组织与性能影响
Effect of carbide distribution on microstructure and properties of NM500 grade wear-resistant steel
摘要 马氏体耐磨钢因其优异的耐磨性能在冶金、建材等领域得到广泛应用,但其韧性不足,限制了材料的使用寿命.为改善该钢种的韧性不足,对试验钢采用淬火后分段回火热处理,以促进碳化物在马氏体板条内部析出.结果表明,分段回火使碳化物在晶界上的占比由45%降至25%,试样的冲击韧性与耐磨性均优于常规回火工艺.通过正交试验及方差分析发现,第一段回火温度和时间分别对冲击韧性和硬度具有显著性影响.获得的最佳分段回火工艺为130 ℃保温45 min后再经200 ℃保温45 min,与常规200 ℃回火相比,其冲击功和耐磨性分别提高了 20%和 42%.
Abstract:
Martensitic wear-resistant steel is widely used in metallurgy,building materials due to its ex-cellent wear resistance.However,its insufficient toughness limits the service life of the material.To ad-dress this issue,a two-step tempering heat treatment after quenching was adopted to promote the precip-itation of carbides within the martensitic laths.The results show that the two-step tempering reduces the proportion of carbides at grain boundaries from 45%after conventional tempering to 25%,leading to superior impact toughness and wear resistance compared to conventional tempering.Orthogonal experi-mental analysis and variance analysis reveal that the temperature and duration of the first tempering step exert significant effects on impact toughness and hardness,respectively.The optimal two-step temper-ing process is identified as tempering at 130℃ for 45 minutes followed by 200℃ for 45 minutes.Com-pared with conventional tempering at 200℃,this process improves impact energy and wear resistance by 20%and 42%,respectively.
刊 名 钢铁钒钛 ISTICPKU
年,卷(期): 2026, 47(4)
分类号: TF76 TG156.5
机标分类号: TG142.1 TG457.11 TG335.11
在线出版日期: 2026年11月11日
基金项目: 2025CK1015:湖南省示范性科技成果转化项目,