军事知识服务平台
回火温度对含钒X80管线钢显微结构及低温冲击韧性的影响
Effect of tempering temperature on the microstructure and low-temperature impact toughness of vanadium-contained X80 pipeline steel
摘要 为了明确轧后回火温度对含钒X80管线钢低温冲击韧性的影响,通过多种微观结构表征手段,对经过不同轧后回火温度处理的六组试验钢显微结构进行了研究,阐明其与低温冲击韧性之间的关系.结果表明,回火温度由450 ℃提高到650 ℃,钢中纳米尺度析出相尺寸与数量增加,钢中针状/板条状铁素体及粒状贝氏体的尺寸和数量降低,多边形铁素体增多,钢中大角度晶界比例降低,低温冲击韧性主要由析出相的尺寸和数量主导,呈现逐渐降低的变化趋势;而当回火温度升高至700 ℃时,钢中细小析出相数量比例降低,平均尺寸增大,显微组织主要由粗大的多边形铁素体构成,且大角度晶界比例和Σ3晶界占比显著增高,晶界结构特征为该条件下低温冲击韧性的主要影响因素,冲击功大幅提升,高达307.28 J.
Abstract:
In this paper,in order to clarify the influence of tempering temperature after thermo-mechan-ical control process on the low-temperature impact toughness of vanadium-contained X80 pipeline steel,the microstructural variation including nano-scale precipitates,microstructure,grain boundaries,and crystallographic characteristics,in experimental steels processed under six different tempering temperat-ures were investigated by multiple microstructural characterization methods.Furthermore,the relation-ship between the steel microstructures and low-temperature impact toughness was revealed.The results showed that with increasing tempering temperature from 450 ℃ to 650℃,the size and number of nano-scale precipitates in steel increased,while the size and quantity of granular acicular/lath ferrite and bain-ite decreased.Under these conditions,the low-temperature impact toughness was primarily dominated by the size and quantity of precipitates,exhibiting a gradually decreasing trend.Meanwhile,the number of polygonal ferrite increased and the ratio of high angle grain boundaries decreased.These microstruc-tural changes led to a gradual decrease in low-temperature impact toughness.However,as the temper-ing temperature increased to 700℃,the ratio of fine precipitates in steel decreased and the average size increased.Moreover,the microstructure composed of coarse polygonal ferrite,with a significant in-crease in the ratio of high angle grain boundaries and Σ3 grain boundaries.Under tempering treatment at 700 ℃,the structural characteristics of grain boundaries were the main factors influencing low-temper-ature impact toughness.The impact energy of the steel tempered at 700℃ has been greatly improved,reaching up to 307.28 J.
刊 名 钢铁钒钛 ISTICPKU
年,卷(期): 2026, 47(4)
分类号: TF76 TF704.2
机标分类号: TG142.1 TG406 TG335.5
在线出版日期: 2026年11月11日